FAQs (Frequently Asked Questions)
A:Unlike CRT display technology, in which the speed of the electron beam is swept from the top to the bottom of the screen determines flicker, an active matrix display uses an active element (TFT) to control each individual pixel and the refresh rate is therefore not really applicable to LCD technology.
Q:Will the LCD screen be resistant to scratches?
A:A protective coating is applied to the surface of the LCD, which is durable to a certain extent (approximately up to the hardness of a 2H pencil). In general, it is recommended that the panel surface is not subject to any excessive shocks or scratches. An optional protective cover with greater scratch resistance is also available.
Q:How should I clean the LCD surface?
A:For normal cleaning, use a clean, soft cloth. For extensive cleaning, please use isopropyl alcohol. Do not use other solvents such as ethyl alcohol, ethanol, acetone, hexane, etc.
Q:Can the Philips LCD Monitor be mounted on the wall or used as a touch panel?
A:Yes. Philips LCD monitors have this optional feature. The standard VESA mount holes on the back cover allows the user to mount the Philips monitor on any VESA standard ARM or accessories. Touch panels are being developed for future applications. Check with your Philips sales representative for more information.
RETURN TO TOP OF THE PAGE
LightFrameTM 3
Q:Is LightFrameTM 2 compatible with LightFrameTM 3?
A:No. If you run LightFrameTM 1 or 2 software with a Philips LightFrameTM 3 monitor, nothing will happen.
Q:Can I use LightFrameTM 3 software on my LightFrameTM 1 / 2 monitor.
A:No for a LightFrameTM 1 or 2 monitor you need to use LightFrameTM 1 or 2 software. It is however possible to use the LightFrameTM 2 software on a LightFrameTM 1 monitor.
file:///D/My%20Documents/dfu/W9/english/190p5/safety/saf_faq.htm (3 of