Philips 190VW8 user manual Vertical flicker appears

Troubleshooting

Vertical flicker appears

● Press the Auto button.

● Eliminate the vertical bars using the Phase/Clock of More Settings in OSD Main Controls.

Horizontal flicker appears

The screen is too bright or too dark

An after-image appears

An after-image remains after the power has been turned off.

Green, red, blue, dark, and white dots remains

●Press the Auto button.

●Eliminate the vertical bars using the Phase/Clock of More Settings in OSD Main Controls.

●Adjust the contrast and brightness on On-Screen Display. (The backlight of the LCD monitor has a fixed life span. When the screen becomes dark or begins to flicker, please contact your sales representative).

●If an image remains on the screen for an extended period of time, it may be imprinted in the screen and leave an after- image. This usually disappears after a few hours

●This is characteristic of liquid crystal and is not caused by a malfunction or deterioration of the liquid crystal. The after- image will disappear after a peroid of time.

●The remaining dots are normal characteristic of the liquid crystal used in today’s technology.

For further assistance, refer to the Consumer Information Centers list and contact Philips customer service representative.

RETURN TO TOP OF THE PAGE

file:////Cnhszhctv1dt476/make%20cd/190VW8/190VW8%20CD/lcd/manual/English/190SW8/safety/saf_troub.htm (2 of 3)2007-8-9 15:45:28