Contents, LCD Television | Philips 3139 125 33021 instruction

Press to toggle the different screen format options.

LCD TV

Quick Use and Hookup Guide

Important Notice/Warning	.1	Component Video Input Connections	3
Basic TV Operation	.1	High Definition Input Connections	3
Remote Battery Installation	.1	Headphone/Sub-woofer/Data Jacks	3
Remote Control Button Descriptions	.1	PC (Monitor) Connection	4
Hooking up the Television		AV2 Input Connections	4
Basic Cable/Cable Box TV Connections	.2	AV3 Input Connection	4
Basic Antenna TV Connections	.2	Monitor Output Connections	4
AV1 Input Connections	.3

IMPORTANT

NOTE: This owner's manual is used with several different television models. Not all features (and drawings) discussed in this manual will necessarily match those found with your television set. This is normal and does not require that you contact your dealer or request service.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS UNIT TO RAIN OR EXCESSIVE MOISTURE.

BASIC LCD TV AND REMOTE OPERATION

LCD TELEVISION

This LCD television has a set of controls located on the top of the cabinet for use when the remote control is not needed.

1 Press the POWER button on the front of the TV cabinet to turn the TV ON.

Note: With AutoChron ON, the TV will search for a PBS chan- nel to set the clock before powering itself on. This can take a few seconds.

2 Press the VOLUME + button to increase the sound level or the VOLUME – button to lower the sound level.

Pressing both buttons at the same time will display the onscreen menu. After you are in the menu, use these buttons to make adjustments or selections.

3 Press the CHANNEL + or – button to select TV channels. Use these buttons to make adjustments or selections in the onscreen menu.

There is also a set of Audio and Video Input jacks located on both sides and the bottom of the television cabinet. Refer to the Audio/Video Hookup sections within this Guide.

REMOTE CONTROL BATTERIES

To load the supplied batteries into the remote:

1 Remove the battery compartment door on the back of the remote.

2 Place the batteries (2-AA) in the remote. Be sure the (+) and

(–) ends of the batteries line up correctly (the inside of the case is marked).

3 Reattach the battery compartment door.

REMOTE CONTROL BUTTONS

PIP Button - When in the PC Mode, pressing the PIP button will bring up a smaller second screen window to view programming while using the TV as a com- puter monitor.

Accessory Device , , , , Buttons - Press to rewind, stop, play,

fastforward, or pause/freeze a videotape, or DVD.

TV/DVD/ACC Mode Switch - Slide to the TV position to control TV func- tions, to the DVD position to control DVD Player functions, or to the ACC position to control the functions of accessory devices (a cable converter, DBS, or VCR, for example).

Program List Button - Press to display a list of channel numbers and their names. Each channel will appear as a selectable menu item. Refer to the Program List section within the Directions for Use manual supplied with the TV for detailed instructions.

Sleep Button - Press to set the TV to automatically turn itself OFF at a given amount of time.

TV/VCR (A/CH) Button - TV/VCR – Press while in the VCR mode (the VCR indicator on the front of the VCR will light) to view the playback of a tape. Press again to place in the TV position (the VCR indicator light will go off) to view one program while recording another program. A/CH – Press to toggle between the cur- rently viewed channel and the previously viewed channel.

Auto Sound Button - Press to select an AutoSound™ control. Choose from three factory-set controls (VOICE, MUSIC, and THEATRE) and a PERSONAL to tailor the TV sound to enhance the particular type of program you are watching.

Menu (Select) Button - Press for the onscreen menu to appear. Pressing the menu button after menu selections are made will eliminate the menu from the dis- play.

Active Control Button - Press repeatedly to toggle the Active Control to ON or OFF. When ON, the sharpness and noise reduction will be continuously monitored.

Cursor Buttons (Left, Right, Up, Down) - Press these buttons to highlight, select, and adjust items on the TV's onscreen menu.

Volume (+) or (–) Buttons - Press to adjust the TV sound level.

Mute Button - Press to turn the TV sound OFF. Press again to return the sound to its previous level.

Status/Exit Button - Press to see the current channel number on the TV screen. Also press to clear the TV screen after control adjustments.

VOLUME

Be sure to point the remote at the Remote Sensor window on the front of the television when using the remote control to operate the television.

Remote Control

(shown from the bottom)

2 “AA” Batteries

PIP POSITION CC

PROG. LIST

CLOCK

DVD

SLEEP TV/VCR SOURCE FORMAT

ACC

A/CH

AUTO	ACTIVE	AUTO
SOUND	CONTROL	PICTURE
		SURR.
MENU		SOUND

MUTE

VOL

RADIO

PC TV HD

1 2 3

4 5 6

7 8 9

STATUS/EXITSURF

Volume and Channel buttons are located

on the top of the television cabinet.

Remote Sensor Window

DC Input located on the

bottom jack panel of the TV

DCin(24V) PCinput(VGA)

CHANNEL

2 1 3

Power Cord and Adapter

Battery Compartment Door

Battery Compartment

Power Button - Press to turn the TV ON and OFF.

Position Button - When using the PC Mode and the PIP window is present on the screen, press the Position button to move the PIP window to any of the four corners.

CCButton - Press to select Closed Captioning options within the menu. (See the Directions for Use manual for details.)

Clock Button - Press the CLOCK button to access the onscreen Clock menu.

Format Button -

Source Button - Press to toggle between the different A/V Input jack con- nections and the currently tuned channel.

Auto Picture Button - Press to select an AutoPicture™ control. Choose from four factory-set controls (MOVIES, SPORTS, WEAK SIGNAL, and MULTI MEDIA) and a PERSONAL control that you set according to your own preferences through the onscreen PICTURE menu. The four factory-set controls will tailor the TV picture so as to enhance the particular type of pro- gram you are watching, or to improve the picture of a program that has a weak signal.

Surr. Sound button - Press to set various factory Incredible Surround Sound listening modes. (Refer to the Incredible Surround section within the Directions for Use for detailed instructions.)

Channel (+) or (–) Buttons - Press to change the tuned channel.

Mode buttons - Press to directly enter a specific mode, use the PC button to place the TV in the PC (computer monitor) mode, press the HD button to place the TV in the HD (high definition) mode, press the Radio button to place the TV in the FM Radio mode, or the TV button to place the TV back to its normal TV mode.

Number Buttons - Press the number buttons to select TV channels. When selecting single-digit channels, press the number of the desired channel. The TV will pause for a few seconds and then tune to the selected channel. (Note: You can press 0, then the number also.) For channels 100 and above, first press 1 then the next two numbers of the desired channel.

Surf Button - Press to select previously viewed channels. You can place up to 10 channels in memory. Then by pressing the SURF button you can quickly view the select channels. (See the “Using the Channel Surf Control” section in your Instructions for Use manual to see how to select a series of channels using the Surf button.)

3139 125 33021

Philips 3139 125 33021 owner manual Basic LCD TV and Remote Operation, Contents, LCD Television