Philips BDL4635E/00 user manual Troubleshooting

Page 48

User Manual BDL4635E

Troubleshooting

No picture

The signal cable should be completely connected to the display card/computer.

The display card should be completely seated in its slot.

Front Power Switch and computer power switch should be in the ON position.

Check to make sure that a supported mode has been selected on the display card or system being used. (Please consult display card or system manual to change graphics mode.)

Check the monitor and your display card with respect to compatibility and recommended settings.

Check the signal cable connector for bent or pushed-in pins.

If nothing is displayed on the screen when HDCP device is connected, reset the power of the device.

Power Button does not respond

• Unplug the power cord of the monitor from the AC outlet to turn off and reset the monitor.

Image persistence

Please be aware that LCD Technology may experience a phenomenon known as Image Persistence. Image Persistence occurs when a residual or “ghost” image of a previous image remains visible on the screen. Unlike CRT monitors, LCD monitors’ image persistence is not permanent, but constant images being displayed for a long period of time should be avoided. To alleviate image persistence, turn off the monitor for as long as the previous image was displayed. For example,

if an image was on the monitor for one hour and a residual image remains, the monitor should be turned off for one hour to erase the image.

NOTE:

As with all personal display devices, PHILIPS recommends displaying moving images and using a moving panel saving at regular intervals whenever the screen is idle or turning off the monitor when not in use.

Image is unstable, unfocused or swimming is apparent

Signal cable should be completely attached to the computer.

Use the OSD Image Adjust controls to focus and adjust display by increasing or decreasing the fine adjustment. When the display mode is changed, the OSD Image Adjust settings may need to be re-adjusted.

Check the monitor and your display card with respect to compatibility and recommended signal timings.

If your text is garbled, change the video mode to non-interlace and use 60 Hz refresh rate.

Image of component signal is greenish

• Check to see if the CVI input connector is selected.

LED on monitor is not lit (no green or red color can be seen)

Power Switch should be in the ON position and power cord should be connected.

Make certain the computer is not in a power-saving mode (touch the keyboard or mouse).

RED LED on monitor is blinking

• A certain failure might have occurred, please contact your nearest authorized PHILIPS service facility.

Display image is not sized properly

Use the OSD Image Adjust controls to increase or decrease the coarse adjustment.

Check to make sure that a supported mode has been selected on the display card or system being used. (Please consult display card or system manual to change graphics mode.)

Advanced anti image sticking

• static images left on-screen for extended periods of time may leave a "ghost image" or image sticking effect on LCD displays. Although image sticking in LCD displays is not permanent , you want to prevent this to happen, especially in locations where content is shown almost 24/7.

Selected resolution is not displayed properly

Use OSD Display Mode to enter Information menu and confirm that the appropriate resolution has been selected. If not, select corresponding option.

45

Image 48
Contents Public Signage Solutions Table of Contents Page Safety Instructions Regulatory Information CE Declaration of Conformity Federal Communications Commission FCC Notice U.S. OnlyPolish Center for Testing and Certification Notice ELECTRIC, Magnetic and Electronmagnetic Fields EMFHow to connect a plug Information for UK only环保使用期限 North Europe Nordic Countries Information VarningVaroitus END-OF-LIFE DisposalContents Elements Name and Functions Control PanelTerminal Panel Audio OUTRemote Control Power buttonOperating Range for the Remote Control Handling the remote controlHow to Mount or Attach Table stand to the LCD Monitor Way 1 Attach and remove the optional Table standWay II Mount the monitor on the wall To avoid monitor from fallingVentilation Requirements for enclosure locating Setup Procedure Adjust the image Recommended AdjustmentTo prevent the main power switch from being changed Install the LCD Monitor in Portrait Mode How to set-upConnectivity Diagram ConnectivityBefore making connections Connecting to a Personal Computer Connecting the LCD Monitor to a Personal ComputerConnecting to a Digital Interface Equipment Connect the LCD Monitor to a Computer with a Digital OutputConnecting to a DVD Player Connect the LCD Monitor to a DVD PlayerConnecting to a Stereo Amplifier Connect the LCD Monitor to a Stereo AmplifierPower on and OFF Modes Pressing the Main Power SwitchPressing the power button Using the remote controlPower Indicator Using Power ManagementDisplay Signal of Video Source Setting to Video Picture SizeSmart Picture Mode Audio Source SwitchingControl Lock Mode OSD InformationOSD On-Screen-Display Controls Brightness ContrastSharpness Black LevelColor Temperature Picture ResetColor Control Zoom Mode PositionScreen Reset Custom ZoomAudio Reset BalanceTreble BassPIP Reset PIP SizePIP Audio Power Save LanguagePanel Saving Configuration Reset Factory ResetSleep Timer OSD Turn OFFInformation OSD OSD H PositionMonitor Information Advanced Option Gamma SelectionIR Control Keyboard ControlTiling Date and TimeSmart Power Advanced Option ResetMonitor ID DDC/CIFor long life use of Public Display Image Sticking of LCD PanelRecommendations Remote control numbering function MainBright Dot Defects Bright DOT Effect Acceptable Level Features Full HD LCD display 1920x1080pTroubleshooting Remote Control is not available SCHEDULE/SLEEP Timer function is not working properlyNo Signal is displayed on the screen No SoundSpecifications Specifications BDL4635EPin Assignment SDASpecifications are subject to change without notice

BDL4635E, BDL4635E/00 specifications

The Philips BDL4635E, BDL4635E/00, is a cutting-edge display solution designed for various commercial applications, including retail, control rooms, and corporate environments. Known for its reliability and high-quality performance, this display boasts exceptional features that make it a standout choice for businesses looking for an effective visual communication tool.

One of the main features of the BDL4635E is its stunning 46-inch Full HD display with a resolution of 1920 x 1080 pixels. This provides crystal-clear images and vibrant colors, ensuring that your content is shown in the best possible light. The display utilizes advanced LED backlighting technology, which not only enhances picture quality but also reduces energy consumption. This makes the BDL4635E an eco-friendly option that aligns with modern sustainability goals.

In addition to its impressive visual capabilities, the BDL4635E is equipped with a robust commercial-grade panel. Designed for 24/7 operation, it can withstand the demanding conditions of continuous use without degrading performance. This reliability is crucial for environments where constant uptime is essential, such as airports, shopping malls, and conference rooms.

Connectivity is another strong suit of the BDL4635E. It features multiple input options, including HDMI, DisplayPort, and DVI, allowing for seamless integration with various media sources. The ability to connect multiple devices simultaneously opens up a world of possibilities for interactive presentations and live streaming.

The BDL4635E is also designed for ease of use and maintenance. It includes an integrated media player that supports a range of file formats, enabling users to play content without the need for external hardware. Furthermore, it supports advanced content management solutions, making it easy to update and schedule displays remotely.

Another noteworthy characteristic is its sleek and modern design, which complements the aesthetics of any space. The narrow bezels minimize distractions, ensuring that the focus remains on the content displayed.

In summary, the Philips BDL4635E, BDL4635E/00, is a versatile and powerful display that meets the needs of various commercial applications. With its exceptional image quality, reliability, abundant connectivity options, and user-friendly features, this display solution stands out as an excellent choice for businesses looking to enhance their visual communication.