• Safety and |
Troubleshooting |
• FAQs |
• Common |
Problems |
Troubleshooting
This page deals with problems that can be corrected by the user. If the problem still persists after you have tried these solutions, contact your nearest Philips dealer.
• Imaging |
Problems |
• Regulatory |
Information |
• Other Related |
Information |
Common Problems
Having this problem
No Picture
(Power LED not lit)
No Picture
(Power LED is amber or yellow)
Screen says
Check these items
●Make sure the power cord is plugged into the power outlet and into the back of the monitor.
●First, ensure that the power button on the front of the monitor is in the OFF position, then press it to the ON position.
●Make sure the computer is turned on.
●Make sure the signal cable is properly connected to your computer.
●Check to see if the monitor cable has bent pins.
●The Energy Saving feature may be activated
●Make sure the monitor cable is properly connected to your computer. (Also refer to the Quick
●Check to see if the monitor cable has bent pins.
●Make sure the computer is turned on.
Screen says
AUTO button not working properly
●Make sure the vertical sync of input signal is within the range of 56 ~ 76 Hz.
●Change the refresh rate to 56~76Hz within 10 minutes.
●
●The Auto Function is designed for use on standard Macintosh or IBM- compatible PCs running Microsoft Windows.
●It may not work properly if using nonstandard PC or video card.
●The AUTO adjustment does not function when digital input is used for display.