Philips 1.92E+04 manual Safety precautions and maintenance, Operation

Page 3

1. Important

This electronic user’s guide is intended for anyone who uses the Philips monitor.Take time to read this user manual before you use your monitor.

It contains important information and notes regarding operating your monitor.

The Philips guarantee applies provided the product is handled properly for its intended use, in accordance with its operating instructions and upon presentation of the original invoice or cash receipt, indicating the date of purchase, dealer’s name and model and production number of the product.

1.1 Safety precautions and maintenance

Warnings

Use of controls, adjustments or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards and/or mechanical hazards.

Read and follow these instructions when connecting and using your computer monitor.

Operation

Keep the monitor out of direct sunlight and away from stoves or any other heat source.

Remove any object that could fall into ventilation holes or prevent proper cooling of the monitor’s electronics.

Do not block the ventilation holes on the cabinet.

When positioning the monitor, make sure the power plug and outlet are easily accessible.

If turning off the monitor by detaching the power cable or DC power cord, wait for 6 seconds before attaching the power cable or DC power cord for normal operation.

Please use approved power cord provided by Philips all the time. If your power cord is missing, please contact with your local service center. (Please refer to Customer Care Consumer Information Center)

Do not subject the monitor to severe vibration or high impact conditions during operation.

Do not knock or drop the monitor during operation or transportation.

Maintenance

To protect your monitor from possible damage, do not put excessive pressure on the LCD panel. When moving your monitor, grasp the frame to lift; do not lift the monitor by placing your hand or fingers on the LCD panel.

Unplug the monitor if you are not going to use it for an extensive period of time.

Unplug the monitor if you need to clean it with a slightly damp cloth.The screen may be wiped with a dry cloth when the power is off. However, never use organic solvent, such as, alcohol, or ammonia-based liquids to clean your monitor.

To avoid the risk of shock or permanent damage to the set, do not expose the monitor to dust, rain, water, or excessive moisture environment.

If your monitor gets wet, wipe it with dry cloth as soon as possible.

If foreign substance or water gets in your monitor, please turn the power off immediately and disconnect the power cord.Then, remove the foreign substance or water, and send it to the maintenance center.

Do not store or use the monitor in locations exposed to heat, direct sunlight or extreme cold.

In order to maintain the best performance of your monitor and use it for a longer lifetime, please use the monitor in a location that falls within the following temperature and humidity ranges.

o Temperature: 0-40°C 32-95°F

o Humidity: 20-80% RH

1

Image 3
Contents Troubleshooting & FAQs Table of Contents Safety precautions and maintenance Temperature 0-40C 32-95F Humidity 20-80% RHOperation Notational Descriptions Weee Install base stand Installation Package contentsPage Main menu Sub menu Basic and simple instruction on the control keysResolution notification 100mm SmartImage Lite What is it? Why do I need it?How does it work? There are 3 modes to be selected Standard Internet, and Game Philips SmartControl Lite Start with Standard pane Adjust menu Color menu Next goes to the succeeding target 6-targets On single input displays, this pane will not be visible Task Tray Menu Enabled Task Tray Menu DisabledExit Close SmartControl Lite Bright Dot Defects Philips Flat Panel Monitors Pixel Defect PolicyPixels and Sub pixels Types of Pixel DefectsModel Picture/Display LCD panel type TFT-LCDYES Power 192E2 On mode typical 18.2W Energy Consumption WxHxD Box dimension WxHxDProduct without stand Rohs YES Epeat Mtbf50,000 hrs 192E2, 30,000 hrs 192EL2 EnvironmentalAutomatic power saving feature Power Management Definition Automatic PowerSavingEpeat Electronic Product Lead-free ProductBenefits of Epeat 2006/95/EC Low Voltage Directive 2004/108/EC EMC DirectiveProduct also comply with the following standards Reorient or relocate the receiving antenna Federal Communications Commission FCC Notice U.S. OnlyFCC Declaration Commission Federale de la CommunicationPlassering/Ventilasjon Polish Center for Testing and Certification NoticePaikka/Ilmankierto VaroitusAchtung Beim Aufstellen Ergonomie Hinweis nur DeutschlandPacific Eastern EuropeLatin America North AmericaWhat is excluded? Page Just a click away Just a phone call away Dear CustomerCzech Republic Estonia Fujitsu Services OUBelarus BulgariaSlovakia Romania TurkeySerbia & Montenegro UkraineCompany Name PT. Gadingsari elektronika Prima South Africa AfricaPage Where can I GET More INFORMATION? WHO is COVERED? What is COVERED?What is EXCLUDED? Your warranty does not coverTo GET Warranty Service in Canada Your International Guarantee Dear Customer Troubleshooting No Picture Power LED not litScreen says Green, red, blue, dark, and white dots appears on the screen Power on light is too strong and is DisturbingSmartControl Lite FAQs Page Q7 How should I clean the LCD surface? Color TemperatureThe 2 settings are 6500K, and 9300KQ9 Can the Philips LCD Monitor be mounted on the wall?
Related manuals
Manual 49 pages 21.29 Kb