The OSD Controls
7) | To adjust the balanced pincushion, press the | or | button. |
| |
8) | When the balanced pincushion is adjusted, press the | button to return to the ADJUST SHAPE | |||
window. BACK TO MAIN WINDOWS will be highlighted. |
|
| |||
9) | Press the | button to return to the MAIN CONTROLS window, or press the | button until ADJUST | ||
SIDE ANGLES is highlighted. |
|
|
| ||
|
| After returning to MAIN CONTROLS . . . |
|
| |
|
| ...to continue to ADJUST SIDE ANGLES, start with step 5 under ADJUST SIDE | |||
| Smart | ANGLES and follow the directions. |
|
|
|
| ...to exit completely, press the | button twice. |
| ||
Help |
|
...to adjust only the BALANCED pincushion, follow steps 1 - 4 above, then press the
button, and follow steps 7 - 9.
ADJUST SIDE ANGLES
ADJUST SIDE ANGLES under ADJUST SHAPE allows you to adjust two of the five preset options. These two options are TRAPEZOID and PARALLELOGRAM. Note: use these features only when the picture is not square.
1)Press the button on the monitor. The MAIN CONTROLS window appears.
2)Press the button until ADJUST SHAPE is highlighted.
file:///D/EDFU/crt_17/edoc/english/OSD/osd_cont.htm (11 of 25) [6/25/2003 10:10:05 AM]