Samsung MM-B3/B4 Microphone Function option, Connecting Headphones, Press Push Eject

Microphone Function (option)

B

The microphone enables the user to mix in his or her vocals to sing-along with the music.

Connecting Headphones

You can connect a set of headphones to your micro component system so that you can listen to music or radio programs without disturbing other people in the room.

Safety Precautions	Cleaning Your
	Micro-Component System
		GB
The following diagrams illustrate the precautions to be taken	To obtain the best possible results from your
when using or moving your micro-component system.	micro-component system, you must clean the following
	elements regularly:

Preparation

Plug the microphone with a 3.5mm mic jack into microphone terminal.

ANTENNA

The headphones must have a 3.5 mm connector or appropriate adapter.

Connect the headphones to the Phones connector on the rear panel (or top right corner).

Result: The loudspeakers are no longer used for sound output.

Prolonged use of headphones at a high volume may damage your hearing.

ANTENNA

Ambient operating conditions:

Ambient temperature	5°C-35°C
Humidity	10-75%

Do not place potted plants or vases on top of the unit. Moisture entering the unit could lead to dangerous electric shock and can cause equipment damage. In such events immediately disconnect the main plug from the socket.

The outer casing

The compact disc player

The cassette players (heads, rollers and drive capstans)

Always unplug the system from the wall outlet:

Before cleaning it

If you are not going to be using it for a long time

Outer Casing

	Clean the outer casing regularly using a soft cloth and a light detergent. Do
	not use abrasive powders, liquids or aerosol cleaners. Never let any liquids
Do not expose the unit to direct sun	get into the system.
radiation or other heat sources.	Compact Disc Player
This could lead to overheating and
	1 Before playing a compact disc, clean it with a special CD cleaning
malfunction of the unit.
	agent. Do not use the same cleaning agents as for vinyl LP records.
	Carefully wipe the disc from the centre outward.
	2 Regularly clean the player with a special cleaning disc (available
	from your local dealer).
	Tape Decks
	1 Press Push Eject(	) to open the cassette deck.
	2 Use a cotton bud and a special cassette cleaning agent to clean the:
During thunderstorms, disconnect	Head (1)
	Rollers (2)
the main plug from the socket.
	Drive capstans (3)
Main voltage peaks due to light-
ning could damage the unit.
			3
VOLUME
UP
		1	2
DOWN

Remove the batteries from the remote control, if not used for any extended period.

Leaking batteries can cause serious damage to the remote control.

When using headphones, take care not to listen at excessive volumes. Extended use of headphones at high volumes will lead to hearing damage.

If you will not be using the remote control for a long time, remove the batteries to prevent corrosion.

Although your system is very hard-wearing, it should not be used in an excessively dusty environment or subjected to shocks or extreme heat (close to heating appliances or in direct sunlight, etc.).

If the unit emits an unpleasant odor when in use, unplug it from the main supply and contact the after-sales service.

Do not place heavy items on the	Do not remove any equipment panels.
main lead. Main cable damage can	The inside of the unit
lead to damage of the equipment (fire	contains live components, which
hazard) and can cause electric	cause electric shock.
shock.

18 19