Philips PPX3407, PPX3410 General Safety Information, Setting Up the Device, Repairs, Power Supply

Page 4

1 General Safety Information

Do not make any changes or settings that are not described in this user manual. Physical injury or damage to the device or loss of data can result from improper handling. Take note of all warning and safety notes indi- cated.

Under the following conditions, a layer of moisture can appear inside the device which can lead to malfunctions:

·if the device is moved from a cold to a warm area;

·after a cold room is heated;

·when this device is placed in a damp room.

Proceed as follows to avoid any moisture build-up:

Setting Up the Device

The device is exclusively for indoor use. The device should be placed securely on a stable, ￿at surface. Posi- tion all cables in such a way that no one will stumble on them, thus avoiding possible injuries to persons or dam- age to the device itself.

Do not plug in the device in moist rooms. Never touch the electrical cable or the electrical connection with wet hands.

The device must have suf￿cient ventilation and may not be covered. Do not put your device in closed cabinets or boxes.

Do not place the machine on soft surfaces such as table- cloths or carpets and do not cover the ventilation slits. Otherwise the device could overheat or catch ￿re.

Protect the device against direct sunlight, heat, large temperature ￿uctuations and moisture. Do not place the device in the vicinity of heaters or air conditioners. Observe the information on temperature and humidity in the technical data.

When the device is running for a long period of time, the surface becomes hot and a warning symbol appears on the projection. The device switches automatically to stand-by mode when it gets too hot. After the device has cooled down, you can continue playback by pressing any key.

Do not allow liquids to enter into the device. Switch off the device and disconnect it from the power supply if liquids or foreign substances end up inside the device. Have the product inspected by a technical service department.

Always handle the product with care. Avoid touching the lens. Never place heavy or sharp objects on the pro- jector or the power cable.

If the projector gets too hot or emits smoke, shut it down immediately and unplug the power cable. Have your device examined by trained professionals at a tech- nical service location. To prevent the spread of ￿re, open ￿ames should be kept away from the device.

1Seal this device in a plastic bag before moving it to another room, in order for it to adapt to room con- ditions.

2Wait one to two hours before you take the device out of the plastic bag.

The device should not be used in a very dusty environ- ment. Dust particles and other foreign objects may damage the product.

Do not expose the device to extreme vibrations. It may damage the internal components.

Do not allow children to handle the device without supervision. The packing materials should be kept out of the hands of children.

Repairs

Do not make any repairs to the device yourself. Improper maintenance can result in injuries or damage to the device. Have your device repaired only by an authorised service center.

Do not remove the type label from your device; this would void the warranty.

Power Supply

Use only the enclosed power adapter (see chapter Appen- dix / Technical Data). Check whether the electrical voltage of the power supply matches the electrical voltage available at the setup location. This equipment complies with the voltage type speci￿ed on the product.

The AC main plug of adaptor is used as the power discon- nect device, the socket-outlet shall be installed near the equipment and shall be easily accessible.

The product should be supplied by a power system com- pliant with LPS requirements of 2.5 of UL60950-1.

The capacity of the battery diminishes with time. If the device functions only with the power supply, the battery is defective. Contact an authorised service center to replace the battery.

Do not try to replace the battery yourself. Incorrect handling of the battery or using the wrong type of bat- tery can cause damage to the device or cause injury.

Batteries (battery pack or batteries installed) must not be exposed to ￿ame or excessive heat including from direct sunshine or the like.

Attention should be drawn to the environment aspects of battery disposal.

4

Philips · PPX3407 · PPX3410

Page 3 Page 5
Image 4
Page 3 Page 5
Contents PPX3407 PPX3410 Table of Contents Symbols Used TroubleshootingOverview Dear CustomerGeneral Safety Information Setting Up the DevicePower Supply RepairsRisk of explosion with incorrect type of batteries Side view Top of the DeviceBottom of the Device Remote Control Volume keysDirection Buttons Playback keysSymbols in the Main Menu Overview of the Menu FunctionsConnecting power supply / Charging battery Initial InstallationElectrical Voltage at the Site of Installa- tion Initial OperationInstalling or Changing the Batteries of the Remote Control Nism and slide out the battery compartmentUsing the Remote Control Connecting to Devices with Hdmi output Connecting to a Computer VGACables available as Accessories Connect to the playback deviceConnecting using Audio/ Video Cvbs Adaptor Cable Connecting using Component-Video YPbPr/ YUV CableConnecting to mobile multimedia devices Switching to the multimedia device sig- nal outputConnecting the headphones Memory card / USB storage medium Inserting a Memory Card Connecting USB Storage MediumPrematurely remove a Memory Card Media Playback Video PlaybackVideo Playback USB/SD card/ internal memory File FormatModify settings during playback Modify other settingsPhoto Playback Video Playback Mini-HDMI socketManaging les Music PlaybackCopy Files Error Delete FilesFiles already exist Removing storage mediumConnect to a Computer USB Successful connectionSettings Maintenance Auto demo modeLanguage Service Care Instructions for the BatteryBattery deep discharge Battery recharge time with device offCleaning the Lens CleaningDevice overheated Power Cycling TroubleshootingProblems Solutions Technical Data AccessoriesPower supply AppendixCanada Regulatory Compliance Sagemcom Documents SAS

PPX3410, PPX3407 specifications

The Philips PPX3410 and PPX3407 are compact projectors designed to deliver exceptional portability and high-quality projection capabilities, making them ideal for business presentations, home entertainment, and educational uses. Both models feature advanced projection technologies that ensure clear, vibrant images regardless of the environment.

One of the standout features of the Philips PPX3410 and PPX3407 is their impressive brightness levels. The PPX3410 boasts an output of 300 lumens, making it suitable for use in dimly lit rooms, while the PPX3407 offers a slightly lower brightness of 250 lumens. This difference is pivotal when selecting a projector for specific lighting conditions, as higher lumens translate to clearer images in brighter environments.

Both projectors come equipped with LED technology, which not only enhances color accuracy but also significantly extends the longevity of the device. The lamps in these models can last up to 30,000 hours, reducing the need for replacements and ultimately saving on maintenance costs. This makes the Philips PPX3410 and PPX3407 environmentally friendly options compared to traditional projectors that rely on shorter-lived bulbs.

The projectors are compatible with various input sources, including HDMI and USB, allowing seamless connections to laptops, smartphones, and media players. In particular, the wireless connectivity options in the PPX3410 enable users to project content without the use of cables, providing ultimate convenience and flexibility when sharing presentations or videos.

Both models support a resolution of up to 854 x 480 pixels (WVGA), delivering sharp images and clear text. The compact design allows for easy transport, making these projectors suitable for professionals on the go, as well as for home users looking to create an impromptu cinema experience.

The built-in 4-watt speaker provides adequate sound for small gatherings, eliminating the need for additional audio equipment. However, for larger audiences, external audio systems can be connected via the audio out jack.

In summary, the Philips PPX3410 and PPX3407 projectors are versatile, portable, and equipped with modern projection technologies. Their combination of brightness, longevity, and connectivity options position them as excellent choices for anyone need high-quality projection solutions in a compact design. Whether for work or leisure, these projectors promise to enhance the viewing experience.
Top Page Image Contents