Installation

Note:The D-pad functions as a POV hat for most software titles, but may operate differently depending on the design of each individual game.You can also configure the D-pad to control the X and Y axis through the Test Page found in the SGC2909 Retractable PC Controller properties..

Enter & Esc Buttons

These two buttons will function the same as the Enter and Esc keys found on your Windows keyboard..The En- ter & Esc buttons will commonly be used to select and exit menus during PC games.These controller buttons can be used as a replacement for the Enter & Esc keys found on the keyboard.You no longer need to take your hand off the controller to hit the keyboards Enter and Esc keys..

Note:You must install the SGC2909 Software in order for these buttons to function. If the software is not in- stalled, these buttons will not function.Also, these buttons cannot be re-programmed with the Profile Editor.

Mouse Button

The mouse button is used to turn on/off mouse movement mode. By default, mouse movement is automati- cally assigned to the right analog stick. (This means if mouse movement mode is activated, the right analog stick will automatically control the mouse cursor..) Pressing the mouse button will turn the integrated blue LED on.. With the mouse LED on, moving the right analog stick will control the mouse cursor.With the mouse LED off, the right stick will return to its default Rz and Z axis control. If desired, you can use the Profile Editor to assign mouse movement to the left analog stick, but you must still press the mouse button to activate the mouse movement mode. Mouse movement will only be emulated when the mouse button’s blue LED is illuminating.

Vibration Feedback

The Retractable PC Controller has two internal motors.Their weights are unbalanced to provide vibration when it is activated by game software.

Note:The vibration feedback will only function with software titles that support vibration.You must have also loaded the SGC2909’s software.There are many different force feedback and rumble effects available. How- ever, due to differences in software and hardware design, the Retractable PC Controller may not support all effects.You will find that the range of effects that the Retractable PC Controller supports will vary from game to game..Vibration Feature is not compatible with MAC computers..

Installation

Installation procedure for users of Windows XP & 2000

To properly install your SGC2909 Retractable PC Controller, the controller must be connected to your USB port first. Once Windows XP and 2000 have properly loaded the HID (human interface device) drivers for the SGC2909 you can begin software installation.. Carefully follow the steps below..

Installation procedure for users of Windows 98SE & ME

Installation step for Windows 98SE and ME is the same as the Windows XP and 2000. However, you will need to install the software first and once finished, you can plug in the controller. Please perform the installation in this order to ensure the SGC2909 and software is installed properly.. Carefully follow the steps below in the correct order..

Note: If you are connecting a USB device for the first time,Windows 98SE and ME may ask for the Windows Setup CD-ROM during installation to install the required system files.You will need to place the Windows Setup CD-ROM in your CD-ROM drive to finish the installation.

EN EN