Philips 2 Series Installation Connecting to video equipment, PAL, NTSC, Secam, Projector, Vcr

7. Installation Connecting to video equipment

Connecting to video equipment
Note: The figures in brackets (1) correspond to the figures in the	S-VHS
accessories diagram.
The characters in brackets (a) correspond to the characters
in fig. 4 of ‘Controls and connections’.
Caution!
Always switch off the projector before making any connections.

(c)(f)

Audio out USB Data audio-in VideoVideo audio-in Video S-Video Data out D

PAL, NTSC, SECAM

		(c)	(e)
Audio out	USB	Data audio-in ViViddeeoo audio-in Video		S-Video	Data out	Data in	Projector
							(2)	(4)

(3)

S-Video

Projector

(2)

			Scart adapter
	R Audio L	Video	S-Videoi
VCR			(not for USA
	out	out
			version)
(3)

VCR

L Audio R		Video
	out		out

Scart adapter (not for USA version)

1.Connect the S-Video out socket of a S-VHS video recorder, Laser Disc player, video camera or TV to the S-Video socket

(f)of the projector.

For this use the S-Video connection cable (4) supplied.

2.Connect the Audio out L/R sockets of the S-VHS video recorder, Laser Disc player, video camera or TV to the Video audio-in socket (c) of the projector.

1.Connect the Video out socket of a VCR, Laser Disc player, video camera or TV to the Video socket (e) of the projector. For this, use the video/audio connection cable (2) supplied.

2.Connect the Audio out L/R sockets of the VCR, Laser Disc player, video camera or TV to the Video audio-in socket (c) of the projector.

For this, use audio/video connection cable (2) supplied.

In case your VCR, Laser Disc player, video camera or TV is equipped with a Scart connector (depending on region):

1.Connect the Scart/RCA Audio Video adapter (3) supplied to the Scart connector of the VCR, Laser Disc player, video camera or TV.

2.Plug the video/audio connection cable (2) supplied into both the adapter and the Video (e) and Video audio-in (c) sockets of the projector.

In case your VCR, Laser Disc player, video camera or TV is equipped with a Scart connector (depending on region):

1.Connect the Scart/RCA Audio Video adapter (3) supplied to the Scart connector of the VCR, Laser Disc player, video camera or TV.

2.Plug the audio/video connection cable (2) supplied into both the adapter and Video audio-in socket (c) of the projector.

3.Plug the S-Video connection cable supplied into the VCR and the S-Video socket (f) of the projector.

12