Philips bSure 1 manual Keys on local keyboard or, Lamp indicator, Temperature indicator

Page 46

XP cClear10 English (good) 24-07-2003 15:52 Pagina 46

The projector does not react to commands from the remote control

Indicators

Picture too dark or bright with external monitor connected

7.Troubleshooting

>

–Distance is too large.

• Reduce distance.

–Batteries are exhausted.

•Replace batteries (see ‘Inserting the batteries in the remote control’).

–IR sensor is obstructed.

• Remove obstacle.

Lamp indicator

–green: normal lamp condition.

–orange: lamp life has almost expired (less than 100 hours to go).

•See warning messages on the start up screen for details.

–red: lamp life has expired.

•Replace lamp. See ‘Maintenance’.

–red (fast blinking): lamp start has failed.

•Disconnect projector from the mains. Reconnect and restart. If this does not resolve the problem, replace the lamp. See ‘Maintenance’.

Temperature indicator

–red: temperature error.

• The projector will go into Power/Standby mode. Allow the projector to cool down;

this may take up to 30 minutes. When the LED goes out press any button to activate the projector again.

–fast blinking red: fan error.

•The projector will go into Power Standby mode. Make sure the filter cover is closed properly; clean air inlets or dust filter and allow the projector to cool down; this may take up to 30 minutes. When the LED stops flashing press any button to activate the projector again.

Standby indicator (text on Standby button/ring around Standby button)

–red: standby mode.

–green: operation mode.

–orange: warming up.

–slow blinking (orange): cooling down.

• Do not switch the projector off; it will restart the lamp automatically within a few seconds.

–’Monitor out’ has been enabled, but the external monitor is not correctly connected (the picture on both displays is too bright).

•Connect the (optional) VGA Y-cable (See ‘Connecting to an external monitor’ under ‘Installation’).

•If the VGA Y-cable is correctly connected, verify whether the input impedance of the monitor is correctly set on 75 Ohm.

–’Monitor out’ has not been enabled, but the external monitor is connected (the picture on both displays is too dark).

•Enable the ’Monitor out’ option. Press Menu and use cursor control to go to ‘Settings’ in the menu bar. Select ’Monitor out’ and select ‘On’.

No reaction when pressing

–

’Keylock’ active.

keys on local keyboard or

•

Press OK for 10 seconds to cancel ‘Keylock.’

remote control

 

 

Philips Multimedia Projector

46

English User guide cClear

 

 

 

Page 45 Page 47
Image 46
Page 45 Page 47
Contents CClear Index Set upInstallation IntroductionIndex MaintenanceTroubleshooting OperationIntroduction CClear XG1 Brilliance CClear XG1 WirelessCClear SV10 Introduction IR sensor 9 Receives the signals from the remote control SourceControls Focus ring @ Zoomring #CClear Wireless version only ControlsControls Functional overview Data source connections PS/2Video source connections Switching the projector on and off Set upPositioning the projector and screen Adjusting the vertical angle of the projector Set upAdjusting the focus and size of the image To raisePreparation Remote controlProjector Moving/transporting the projectorRS-232 connection General information Computer inputDigital DVI connection Universal Serial Bus USBExternal monitor connection InstallationPerformance of your projector Video inputInstallationConnecting to a computer Connecting to an external monitor InstallationSwitch on your Computer, projector and external monitor InstallationConnecting to a computer DVI to VGA connectionScart connection Cvbs Video For this use the S-Video connection cable 2 suppliedInstallation Connecting to video equipment Component/HDTV Pr/Cr,Y, Pb/CbScart connection Rgbs ‘RGB sync’ or ‘RGB sog’ appears on the screenInstallation Connecting to audio equipment OperationPreparation Messages Direct key feedbackOperation Error messagesFeedback messages Menu tree OperationMirror Off Window mode Default Double WindowNormal cool Zoom Off, 4x, 9xWireless version SettingsAudio Menu bar appears on the screen First item is highlighted and its sub menu is shownPicture adjustments Computer adjustmentsDisplay adjustments Zoom Selects the size of the PIP window Small, Medium or Large OperationOn Screen Display MenuPIP format LC 6285 only Second SourceSettings General adjustments/settingsAudio adjustments Auto image PhaseDigital Zoom/Magnification Horizontal sizePicture in picture PIP / Double window Mode’ on the remote controlControl Video Current projection source Second sourceCvbs B/CVBS 1 +Data 1- Analog Pb, PrData 2 Data 1- DigitalCb, Cr Cb, Pr Data Analog Digital Wireless dataCClear Wireless version only Picture FormatLoading your own personal start-up screen For bSure2 Brilliance projectors onlyRestarting the projector Cleaning the cabinet MaintenanceCleaning Cleaning the lensLamp MaintenanceLamp replacement Push tab a to the right and remove the lamp doorResetting the lamplife Press Menu TimeRead as follows TroubleshootingComponent Video mode GeneralCase of Rgbs Scart connection TroubleshootingImage is blurred Picture rolls No sound Case of external monitor connectionNo reaction when pressing Lamp indicatorTemperature indicator Keys on local keyboard orBatteries TroubleshootingCase of USB connection

bSure 1 specifications

Philips bSure 1 is a cutting-edge device designed to enhance the user experience in a variety of settings, focusing on health, comfort, and convenience. This compact and versatile product features advanced technologies that cater to the needs of consumers seeking both performance and ease of use.

One of the standout features of the Philips bSure 1 is its user-friendly interface. The device is equipped with a large, clear display that allows users to easily navigate through its menu options and settings. The intuitive design means that users can quickly familiarize themselves with the bSure 1, ensuring a smooth experience right from the start.

In terms of connectivity, the Philips bSure 1 includes Bluetooth technology, enabling seamless integration with smartphones and tablets. This allows users to monitor their health metrics via a dedicated app, offering real-time insights into various statistics. The app is designed to track important data and provide personalized feedback, empowering individuals to make informed decisions about their health and well-being.

The bSure 1 also boasts advanced sensing technology. With high-precision sensors, the device can accurately measure a range of health indicators, such as heart rate and blood pressure. These features are essential for individuals monitoring their health conditions or pursuing fitness goals. The reliability of the readings ensures that users can trust the information provided, making it a valuable tool for daily health management.

Portability is another significant advantage of the Philips bSure 1. Its lightweight and compact design means that it can easily fit into a bag, allowing users to take it on the go. Whether at home, in the office, or traveling, the bSure 1 is designed to be a reliable companion that offers convenience in various situations.

Furthermore, Philips has incorporated energy efficiency into the bSure 1, ensuring that the device consumes minimal power while delivering optimal performance. This consideration for sustainability aligns with the growing consumer demand for eco-friendly products.

In summary, the Philips bSure 1 is an innovative and user-centric device that combines advanced technologies, portability, and sustainability. With its array of features, it serves as an essential tool for those looking to monitor and improve their health effectively. The smart design and reliable performance make it a standout choice in the health technology market.
Top Page Image Contents