3 Get started
Always follow the instructions in this chapter in sequence.
Connect power
Caution
•• Risk of product damage! Make sure that the power supply voltage matches the voltage printed on the bottom of this product.
•• Risk of electric shock! When you unplug the AC power
adaptor, always pull the plug from the socket. Never pull the cord.
Connect the AC power adaptor between
•the DC IN socket at the back of this product, and
•the power supply.
DC IN
Turn on
Press POWER.
»»The product switches to the last selected source.
Switch to standby mode
Press POWER again to switch the product to standby mode.
»»The clock (if set) is displayed.
Select a source
Press SOURCE/SET to select a source.
•Bluetooth mode: Bluetooth indicator lights up.
•FM preset mode: PXX is displayed with XX blinking (XX indicates the preset number of the current station), and then the current station is broadcast with its frequency displayed.
•FM mode:The frequency of current station is displayed.
•AUDIO IN mode: AUX is displayed.
Set the clock
1 In standby mode, press and hold SOURCE/SET for two seconds. »»Hour digits begin to blink.
2 Press - TUNE/TIME or TUNE/TIME+ repeatedly to set the hour.
3 Press SOURCE/SET to confirm. »»Minute digits begin to blink.
4 Press - TUNE/TIME or TUNE/TIME+ repeatedly to set the minute.
5 Press SOURCE/SET to confirm. »»[12H] or [24H] begins to blink.
6 Press - TUNE/TIME or TUNE/TIME+ to select a time format.
• [12H]:
• [24H]:
7 Press SOURCE/SET to confirm.
»»The set time is displayed.
4EN