Philips UM10011 user manual System Requirements, Power Supply Adapter Requirements

Page 6

Philips Semiconductors

UM10011_4

 

 

 

ISP1521 Hi-Speed USB Hub Demo Board

 

 

 

 

3. System Requirements

This hub can be attached to a computer that has a USB or Hi-Speed USB host installed, and running any of these operating systems:

Windows® 98

Windows Me

Windows 2000

Windows XP

MacOS®.

If the hub is plugged into a USB host controller, it will work only as a full-speed hub.

4. Power Supply Adapter Requirements

Regulated Output:

5.1 VCC ± 5%, 4 A.

Warning: The power plug polarity is (-) at the core and (+) at the outer shield.

5. Hub Demo Board Description

5.1.ISP1521 80-Pin LQFP Package

The ISP1521 has these port configurations:

One Hi-Speed USB and USB capable upstream facing port (USB0), and

Seven Hi-Speed USB and USB capable downstream facing ports (USB1, USB2, USB3, USB4, USB5, USB6, USB7).

The port numbers are marked near the USB connectors on the silkscreen. The downstream facing ports USB3, USB4, USB5, USB6 and USB7 can be disabled. Disabling a port will also disable all higher-number ports. For example, disabling port USB4 will disable ports USB5, USB6 and USB7 as well. Therefore, apart from port USB7, it is not possible to selectively disable a port (For example, only USB5.). By design, ports USB1 and USB2 cannot be disabled.

Table 5-1: Jumper Settings vs. Port Activation

J2, J1

 

J4, J3

J6, J5

J10, J9

J8, J7

Active Ports

OFF, OFF

OFF, OFF

OFF, OFF

OFF, OFF

OFF, OFF

USB1 to USB7*

ON, ON

 

OFF, OFF

OFF, OFF

OFF, OFF

OFF, OFF

USB1 to USB6

OFF, OFF

 

ON, ON

OFF, OFF

OFF, OFF

OFF, OFF

USB1 to USB5

OFF, OFF

 

OFF, OFF

ON, ON

OFF, OFF

OFF, OFF

USB1 to USB4

OFF, OFF

 

OFF, OFF

OFF, OFF

ON, ON

OFF, OFF

USB1 to USB3

OFF, OFF

 

OFF, OFF

OFF, OFF

OFF, OFF

ON, ON

USB1 to USB2

*—Default settings.

 

 

 

 

 

These jumpers are set to “ON” by placing a solder joint on the provided footprints.

 

 

© Koninklijke Philips Electronics N.V. 2004. All rights reserved.

User manual

Rev. 04.00 — 17 June 2004

6 of 20

Image 6
Contents UM100114 Contact information Philips SemiconductorsDisclaimer Contents ISP1521 Hub Demo Board Features IntroductionHub Demo Board Description Power Supply Adapter RequirementsSystem Requirements ISP1521 80-Pin Lqfp PackagePort Indicators Power LED IndicatorGoodLink Indicator Port Power Switch Transistors Power SupplyOvercurrent Circuit Detection Windows Reporting of the Bus-Powered Mode Windows Reporting of the Self-Powered Mode I2C-Bus InterfaceSchematics Other JumpersISP1521 Eval Board VCC5 VBUS1 VCC5 Vbus Component Placement Layer 1 Top Routing Layer 2 Ground Planes Layer3 Power Planes Layer 4 Bottom Routing Installing the Board Bill of Materials for the ISP1521 Hub Demo Board References

UM10011 specifications

The Philips UM10011 is a state-of-the-art air purifier designed to enhance indoor air quality and ensure a healthier living environment. This advanced device employs a range of innovative technologies and features that make it a standout choice for consumers looking to breathe clean air in their homes.

One of the primary features of the UM10011 is its Multi-stage Filtration System. This system includes a pre-filter, HEPA filter, and activated carbon filter that work together to capture a wide variety of airborne pollutants. The pre-filter effectively traps larger particles like dust and pet hair, while the HEPA filter captures up to 99.97% of particles as small as 0.3 microns, including allergens, pollen, and even some bacteria and viruses. The activated carbon filter plays a crucial role in removing odors and harmful gases from the air, ensuring a fresher atmosphere.

The UM10011 is equipped with advanced air quality sensing technology. It continuously monitors the air quality in real time and adjusts its performance accordingly. An intuitive display provides users with information on current air quality levels, allowing them to understand the impact of the purifier in real time. When pollution levels rise, the device automatically increases its fan speed to provide enhanced purification.

Noise levels are also a significant consideration for the UM10011. Its ultra-silent operation ensures that it can be used in quiet settings, such as bedrooms or offices, without causing distractions. The device features multiple fan speed settings, enabling users to customize the intensity of air purification based on their specific needs.

In addition to its performance features, the UM10011 boasts a sleek and modern design that fits seamlessly into various home aesthetics. It is compact and lightweight, allowing for easy portability from one room to another. Energy efficiency is another hallmark of the device, designed to operate with minimal power consumption while delivering optimal air purification capabilities.

Overall, the Philips UM10011 is a sophisticated air purifier that combines advanced filtration technology, real-time air quality monitoring, and user-friendly design. Whether it's to reduce allergens or eliminate odors, this device offers an effective solution for maintaining clean and healthy air in your home.