4
installation
Indicator LEDs:
The transmitter and receiver units in the A1020A system each have three integral in- dicator LEDs that are used to monitor the state of the unit. Their status is as follows:
TRANSMITTER and RECEIVER:
Power: (Green) Indicates that correct power has been applied.
TRANSMITTER:
Video: OFF: Indicates no video detected on the input.
BLINKING GREEN: Indicates either H or V sync detected at the input but not on both.
STEADY GREEN: Indicates both H and V sync detected on the input.
Audio: OFF: Indicates no audio detected on the transmitter unit. BLINKING: Indicates audio detected on the transmitter unit.
RECEIVER:
Video: OFF: Indicates no video detected over fiber and, as a result, no video present on output.
BLINKING GREEN: Indicates either H or V sync detected over the fiber but not both.
STEADY GREEN: Indicates both H and V sync detected over the fiber and, as a result, video present on the output.
Audio: OFF: Indicates no audio detected over fiber and, as a result, no active audio detected by the receiver unit.
BLINKING: Indicates audio detected over fiber and, as a result, active audio detected by the receiver unit.
9