Black Box LE3700A-R2 manual Specifications

Page 8

CHAPTER 1: Specifications

1. Specifications

Protocol — NetWare IPX/SPX 2.2 or 3.x, TCP/IP, AppleTalk, LAT

System Requirements — Ethernet-based network running one or more of the following: NetWare, TCP/IP, AppleTalk, or LAT

Logical Connections — Any combination of NetWare, TCP/IP, AppleTalk, or LAT

Number of Lines — 1 serial and 1 parallel

Serial Line Formats — Characters: 7 or 8 data bits; Stop Bits: 1 or 2; Parity: Odd, even, mark, space, or none

Data Rates — 300 to 64K baud

Flow Control — X-ON/X-OFF and or hardware (RTS/CTS) Modem Control — 4 modem control lines, DSR/DTR and RTS/CTS

Environment — Operating Temperature: 41 to 122°F (5 to 50°C); Storage Temperature: -40 to +151°F (-40 to +66°C); Heat Dissipation: 10 watts

Indicators — (7) LEDs: Power, Polarity, Good Link, OK, Network, Parallel, Serial

Connectors — (1) DB25 female for Centronics or Dataproducts parallel,

(1)DB15 female AUI, (2) RJ-45 (one RS-423 [RS-232C compatible] for the serial link, and one for the 10BASE-T network connection)

Power — 12.7–18 VDC, 1 amp (AC converter included)

Size — 0.9"H x 3"W x 5.3"D (2.3 x 7.7 x 13.5 cm)

Weight — 0.5 lb. (0.2 kg)

7

Image 8

Contents

Ethernet Print Server FCC Statement Ethernet Print Server NOM Statement Trademarks Used in this Manual Contents Contents Specifications Introduction DescriptionProtocols Supported Additional Software You May NeedEPS Configuration Printing from the host to the EPSIntroduction Installation EPS Network InstallationInstallation Print Server Screen Power-Up Troubleshooting How Do I Know It’s Working?Code in Flash ROMs is Corrupt Host Configuration NetWare Host ConfigurationAvailable Topics Menu Supervisor Options Menu Available Options Print Queue Information Print Server Information Menu TCP/IP Host Configuration 10. Print Server Info/Status ScreenTo the /etc/hosts file, AppleTalk Host Configuration Optional Rtel FunctionalityLAT Host Configuration Can also be set up as Troubleshooting the Printing Process Host Configuration Ethernet Print Server Protocol Overview NetWare TCP/IPAppleTalk LAT Protocol Overview EPS Configuration Server CharacteristicsPasswords EPS ConfigurationPort Characteristics Service SettingsEPS Configuration AppleTalk Configuration NetWare ConfigurationTCP/IP Configuration LAT Configuration Ethernet Print Server UNIX/RTEL Host Setup Reverse Telnet BackgroundEthernet Print Server Reverse Telnet for Unsupported Unix Machines Installing the Reverse Telnet SoftwareInstallation Procedure Setting up the Rtel Interfaces Creating Rtel Print Queues Queuename server Service Passwd options Deleting Rtel Print Queues Creating Rtel Pseudo-Devices Option Description UsageQueueing with the Rtel Software Rtel Troubleshooting Connecting to a Specific Port Using Telnet Appendix a RJ-45 Adapter Pinout RJ12 Or MMJAppendix a RJ-45 Adapter Pinout Appendix B Cable Limits Network/Cable LimitsSerial Cables Parallel CablesLED Patterns Appendix C Power-Up TestsConnections and Termination LED State Meaning Appendix C Power-Up Tests Appendix D Network Logins Appendix D Network Logins Appendix E Quick-Start Guide Appendix E Quick-Start Guide Ethernet Print Server Page Copyright 2002. Black Box Corporation. All rights reserved