Black Box KV212E, KV120E, KV120A manual To password protect your console, To log in to your console

Page 30

SERVSELECT™ IP INSTALLER/USER GUIDE

3.In the Repeat box, type the password again and press Enter.

4.Click OK to change only your password, and then close the dialog box.

NOTE:

If you should lose or forget your password, you must return your ServSelect IP.

To password protect your console:

1.Set your password as described in the previous procedure.

2.Select Enable Screen Saver.

3.Type the number of minutes for Inactivity Time (from 1 to 99) to delay activation of password protection and the screen saver feature.

4.For Mode, select Energy if your monitor is ENERGY STAR® compliant; otherwise select Screen.

CAUTION:

Monitor damage can result from using Energy mode with monitors not compliant with ENERGY STAR.

5.(Optional) Click Test to activate the screen saver test which lasts 10 seconds then returns you to the Security dialog box.

6.Click OK.

To log in to your console:

1.Press any key or move the mouse.

2.The Password dialog box appears. Type your password, then click OK.

3.The Main dialog box appears if the password was entered properly.

To remove password protection from your console:

1.From the Main dialog box, click Setup - Security; the Password dialog box appears. Type your password, then click OK.

2.In the Security dialog box, single-click and press Enter or double-click in the New box. Leave the box blank. Press Enter.

3.Single-click and press Enter or double-click in the Repeat box. Leave the box blank. Press Enter.

4.Click OK to eliminate your password.

To enable the screen saver mode with no password protection:

1.If your console does not require a password to gain access to the Security dialog box, proceed to step 2.

-or-

28

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Page Page Welcome to the ServSwitch Family Servselect IP INSTALLER/USER Guide Compliance Statements Normas Oficiales Mexicanas NOM Electrical Safety Statement Instrucciones DE SeguridadNOM Statement Contents Specifications Agency ApprovalsFeatures and Benefits Server Access ModulesIntroduction Access via network connection Point and click control with ServSelect IP SoftwareSafety Precautions Rackmount safety considerationsGetting Started InstallationSetting up your network Supplied with the ServSelect IPTo install the 1U switch mounting bracket Rackmounting Your ServSelect IPInstalling the ServSelect IP Basic ServSelect IP ConfigurationTo install the ServSelect IP hardware To configure the ServSelect IP hardwareFor Microsoft Windows 2000/Windows XP For Microsoft Windows NT using default driversTo adjust the mouse acceleration To connect a SAM adapter to each serverTo add a KV158A ServSwitch Multi Z8 switch ServSelect IP Configuration with a Legacy KVM SwitchSetting Up Your ServSelect IP and Software To connect the network and turn on your ServSelect IPControlling Your System at the Analog Port To access the Main dialog boxAnalog Port Operation Viewing and Selecting Ports and ServersOSD Status Symbols Viewing the status of your applianceSelecting servers Soft switching To configure servers for soft switchingTo soft switch to a server Navigating the OSD OSD Navigation BasicsConfiguring the OSD Setup Features to Manage Routine Tasks for your ServersTo access the Setup menu To access the Names dialog box Assigning server namesTo assign names to servers To access the Devices dialog box Assigning device typesTo set a Screen Delay Time for the OSD To access the Menu dialog boxTo choose the default display order of servers Changing the display behaviorTo access the Flag dialog box Controlling the status flagTo determine how the status flag is displayed Setting console security To access the Security dialog boxTo set or change the password To enable the screen saver mode with no password protection To password protect your consoleTo remove password protection from your console To log in to your consoleTo turn off the screen saver Viewing and Disconnecting User ConnectionsTo exit the screen saver mode To immediately turn on the screen saverResetting Your Keyboard and Mouse To reset the mouse and keyboard valuesTo disconnect a user Displaying Version Information To display version informationScanning Your System To add servers to the scan listTo remove a server from the scan list 16. Scan Dialog BoxTo start the scan mode To cancel scan modeBroadcasting to Servers To access the Broadcast dialog box To broadcast to selected serversTo turn broadcasting off Network Configuration Configuring the Terminal MenuTo access the Terminal menu Terminal OperationsTo change the password Enable Debug MessagesSet/Change Password Firmware ManagementTroubleshooting Calling Black BOXShipping and Packaging Appendix Flash Upgrades Upgrading the ServSelect IPTo upload a new Flash file To simultaneously upgrade multiple SAMs Upgrading the SAM firmwareTo upgrade SAM firmware individually Figure A-2. SAM Upgrade Dialog BoxClick the Load Firmware button. The Load dialog box appears Page Page

KV120A, KV212E, KV120E specifications

The Black Box KV120E, KV212E, and KV120A are innovative KVM (Keyboard, Video, Mouse) solutions that bring seamless control to various IT environments. These devices are particularly suited for computer rooms, data centers, and remote server management where efficiency and reliability are paramount.

The KV120E is a compact 2-port KVM switch that allows users to control two computers from a single console. It features an easy-to-use interface that simplifies operations, ensuring users can switch between computers with minimal effort. It supports a maximum resolution of up to 1920 x 1200, ensuring excellent video quality for detailed screens. Its hot-key switching capability allows users to switch seamlessly between connected systems using keyboard shortcuts, a feature that significantly boosts productivity.

The KV212E model expands on this functionality by offering 2-port switching with dual-monitor support, perfect for users requiring extensive screen real estate. This model handles resolutions up to 2560 x 1600, catering to high-definition displays and intensive graphical applications. The KV212E also features advanced EDID (Extended Display Identification Data) emulation, ensuring that display settings remain consistent even when switching between computers. In addition, it supports USB and PS/2 connections, making it versatile for various environments and setups.

Similarly, the KV120A model is a 2-port KVM switch that emphasizes reliability and ease of use. Like its counterparts, it allows for quick toggling between computers and supports a high-resolution output. The KV120A incorporates audio support, allowing users to manage audio sources effectively alongside their visual displays. This feature is particularly useful in setups where multimedia presentation or audio monitoring is required.

All three models boast robust build quality, ensuring long-term durability in demanding environments. With simple plug-and-play installation, users can set them up quickly without additional software or complicated configurations. Moreover, their compact designs allow them to fit easily within standard server racks, optimizing space usage.

In conclusion, the Black Box KV120E, KV212E, and KV120A KVM switches offer critical functionality for IT professionals. Their advanced features help streamline operations in multi-computer environments, enhancing productivity while maintaining an effortless user experience. Whether managing two computers or requiring dual-monitor output, these models fulfill the diverse needs of today's tech-savvy users.
Top Page Image Contents