Black Box LB9017A-R3 manual About This Manual Preface

Page 4

Express Ethernet Switch: LB9017A-R3

About This Manual

Preface

This manual describes how to install and use the 16 Ports Web-based Smart Ethernet Switch. The TX ports of the switch introduced here auto-negotiates the presence of 10/100Mbps and full/half-duplex mode and auto-MDIX. In addition, it allows an optional 100BaseFX multi-mode or single-mode fiber module, enabling long distance connection.

To get the most out of this manual, you should have an understanding of networking concepts such as bridging, IEEE 802.3 10BaseT Ethernet, IEEE 802.3u 100BaseTX/FX Fast Ethernet, and local area networks (LANs).

For more information about these topics, please refer to the Appendices.

In this manual, you will find:

Introduction on the Switch

Product features

Illustrative LEDs functions

Installation instructions

Specifications

3

Image 4
Contents LB9017A-R3 SeptemberExpress Ethernet Switch LB9017A-R3 Express Ethernet Switch LB9017A-R3 About This Manual Preface Table of Contents Product Overview Package ContentsFront View Product Features Power IP Reset Push ButtonFront Panel Display Push ButtonInstallation 100FXPort Selecting a Site for the EquipmentMounted to 19-inch standard rack Installation and Placement InstructionsDesktop or any flat surface Optional Fiber Module Installation Consult the following illustrations before installationConnecting to Your Network Connecting to PowerCabling Cable Specifications Table Network SegmentationSwitch Configuration Logging on to The Ethernet SwitchSwitch IP Address PasswordMain Menu System ChangeIP Configuration Port Vlan Ports Ethernet Switch TrunkingClick Save Configuration Save ConfigurationTechnical Specifications Click Load DefaultLoad Default Ports Web-based Smart Ethernet SwitchSwitch Physical SpecificationsPorts Web-based Smart Ethernet Connector Pinouts RJ-45 Connector and Cable PinsOrdering Information Fixed Ports Single-Port Module