Black Box 16-/24-Port Gigabit PoE PSE Web Smart Switch with 4 SFP Slot, LPBG724A manual Power On

16/24 Port Gigabit PoE PSE With 4 SFP Slots Web Smart Switch

SFP transceiver module

Figure 3-1.

3.1.3 Power On

The switch supports a 100–240 VAC, 50–60 Hz power supply. The power supply will automatically convert the local AC power source to DC power. It does not matter whether or not any connection is plugged into the switch when powering on. After the power is on, all LED indicators will light up and then all will turn off, except for the power LED, which stays on.

3.2 Installing Switch to a 19-Inch Wiring Closet Rail

CAUTION: Allow proper spacing and air ventilation for the cooling fan at both sides of the switch.

Wear a grounding device for electrostatic discharge.

1.Using two screws (included), attach the rackmount ears to the switch’s left and right sides. See Figure 3-2.

2.Line up the mounting holes on the switch assembly (the switch with rackmount ears installed) with the mounting holes on a 19" wiring closet rack. Install two screws (included) to hold the switch in place in the rack.

724-746-5500 l www.blackbox.com Page 11