Black Box ACR1002A-T, ACR1000A-T, ACR1002A-R, ACR1000A-R manual Remote Microphone & Speakers

Page 26

ServSwitch Agility and Agility Dual

3.2.8 Remote Microphone & Speakers

ServSwitch Agility (and Agility Dual) remote units can support a microphone as well as speakers providing the necessary connec- tions have been made between the ServSwitch Agility local transmitter unit and the host computer.

3.2.8.1 To connect a microphone (or line in) and/or speakers on ServSwitch Agility

1Connect the lead from a mono microphone or, alternatively, a line in connection from an audio device to the 3.5mm socket labelled LINE IN/MIC IN on the rear panel. See Figure 3-19.

Connection from microphone or line in from audio device

LINE

MIC

CONSOLE

IN/

 

IN

LINEO

 

 

UT

Link out to speakers

Figure 3-19. Connect the speaker and microphone cables to audio sockets.

2Connect the lead from stereo speakers to the 3.5mm socket labelled LINE OUT on the rear panel.

3Once the unit has been fully connected and powered on, access the RX System Configuration page to check that the Audio Input Type setting matches the connection that you have made to the port: line, mic or mic boost (the latter provides +20dB gain).

3.2.8.2 To connect a microphone (or line in) and/or speakers on ServSwitch Agility Dual

1Connect the lead from a mono microphone or, alternatively, a line in connection from an audio device to the 3.5mm socket labelled on the rear panel. See Figure 3-20.

1

AUX

Connection from microphone or line in from audio device

Link out to speakers

Figure 3-20. Connect the speaker and microphone cables to audio sockets.

2 Connect the lead from stereo speakers to the 3.5mm socket labelled on the rear panel.

3Once the unit has been fully connected and powered on, access the RX System Configuration page to check that the Audio Input Type setting matches the connection that you have made to the port: line, mic or mic boost (the latter provides +20dB gain).

Page 26

724-746-5500 blackbox.com

Page 25 Page 27
Image 26
Page 25 Page 27
Contents ServSwitch Agility and Agility Dual ServSwitch Agility and Agility Dual Trademarks Used in this ManualFCC and IC RFI Statements ServSwitch Agility and Agility Dual Table of Contents Specifications ServSwitch Agility ServSwitch Agility DualOverview One-to-One ConfigurationOne-to-Many Configuration IntroductionMixing ServSwitch Agility and Agility Dual units ServSwitch Agility/Dual and ServSwitch iPathIndicators ServSwitch Agility unit featuresServSwitch Agility local transmitter unit ServSwitch Agility remote receiver unit SERServSwitch Agility Dual unit features ServSwitch Agility Dual local transmitter unitServSwitch Agility Dual remote receiver unit ServSwitch Agility Dual remote receiver unit front panelServSwitch Agility Pair Package ACR1000A ServSwitch Agility Local Unit Package ACR1000A-TServSwitch Agility Remote Unit Package ACR1000A-R ServSwitch Agility Dual Local Unit Package ACR1002A-TInstallation Mounting Rack BracketsInstallation Using the Vesa Mounting BracketLocal Video Link To make a single video link on ServSwitch AgilityConnections To make a single video link on ServSwitch Agility Dual To make two video links on ServSwitch Agility DualLocal Audio Links To make audio links on ServSwitch AgilityTo make audio links on ServSwitch Agility Dual Local USB Link Connecting the serial link cable to Local unit socket Local AUX PortLocal Power Power supply identificationLocal/Remote Network Link To link Agility Dual units using fiber optic links To connect a single DVI display to the ServSwitch Agility Remote Video DisplayTo connect two DVI displays to the ServSwitch Agility Dual Remote Microphone & Speakers USB Devices Supported USB DevicesRemote AUX Port For Agility For Agility Dual To perform a manual factory reset Configuration Initial configurationManual Factory Reset Networked linkingAccessing the Browser-Based Configuration Utility ConfigurationBrowser-Based Configuration Utility Performing an upgrade To upgrade a single unit via network linkOperation Front Panel IndicatorsOperation Further information Layer 2 and Layer 3 switches known to work Appendix A. Tips for success when networking Agility unitsChoosing the right switch AppendicesCreating an efficient network layout Recommended layoutConfiguring the switches and devices Remedies There are a few possible causes Igmp Querier Appendix C. Glossary Internet Group Management ProtocolIgmp Snooping Igmp Fast-Leave aka Immediate LeaveJumbo frames Jumbo packets Spanning Tree Protocol STPAgility transmitter video settings Forwarding modesLayer 2 and Layer 3 The OSI model Network connectionSupported video modes Appendix E. Safety Information Black Box Tech Support FREE! Live /7 About Black Box

ACR1000A, ACR1000A-R, ACR1002A, ACR1002A-T, ACR1002A-R specifications

The Black Box ACR1000A-T, ServSwitch AgilityTM, Agility DualTM, ACR1002A-R, ACR1002A-T, and ACR1002A are advanced solutions designed to optimize switching and management capabilities in complex IT environments. These devices cater to various needs, primarily focusing on KVM (Keyboard, Video, Mouse) switching and user-friendly operations, making them invaluable in data centers, server rooms, and large corporate infrastructures.

The Black Box ACR1000A-T is known for its robust functionality and versatility. It supports video resolutions up to 4K, ensuring high-quality output for a range of applications. This model utilizes dual-channel audio support, enhancing multimedia experiences, while its convenient USB connectivity allows seamless integration with modern peripherals. The ACR1000A-T is designed with a user-friendly interface, simplifying multi-computer management by enabling users to effortlessly switch between systems with a push of a button.

The ServSwitch AgilityTM series elevates performance with efficient switching and extended connectivity options. Designed for high-resolution support, it ensures minimal latency in video transmission. With features such as USB and audio handling, the AgilityTM series provides an inclusive multi-functional experience, allowing users to control multiple machines from a single workstation effortlessly. The enhanced firmware updates ensure that the AgilityTM series remains on the cutting edge of technology, adapting to evolving user demands.

For environments requiring dual-access capabilities, the Agility DualTM provides a unique solution. It enables two users to share control over two different systems simultaneously, offering great flexibility and collaboration in diverse workflows. This innovative approach enhances productivity by allowing one user to work on one system while the other manages a different task, all without needing to switch setups.

The ACR1002A-R, ACR1002A-T, and ACR1002A devices focus on scalability and performance. These models come equipped with comprehensive management features, including remote access capabilities and support for various video resolutions. Ideal for IT administrators, these devices streamline operations, simplifying maintenance and offering excellent reliability.

In summary, the Black Box ACR1000A-T, ServSwitch AgilityTM, Agility DualTM, ACR1002A-R, ACR1002A-T, and ACR1002A represent cutting-edge advancements in KVM technology. With their combination of high-resolution support, user-friendly interfaces, and scalability, they are essential tools in managing multiple computing environments efficiently. These devices not only enhance productivity but also align with the evolving needs of businesses in today's fast-paced digital landscape.
Top Page Image Contents