T e c h S P e c s
Cable Required —
Between hubs and remote units:
Category 5 solid unshielded or shielded twisted pair (UTP or STP), wired to the
Clamping Voltage — Up to 15 volts
Compatibility —
Video: VGA, SVGA, XGA,
Keyboard: IBM PC/AT or PS/2 compatible (PC/AT types require connector adapter);
Mouse: IBM PS/2 compatible
Compliance — CE Class B; FCC Part 15 Subpart B Class A, IC Class/classe A Distance (Maximum) —
ACU1006RA, ACU1012RA, ACU1006DRA, ACU1006SRA, ACU1006DSRA, ACU1006VRA, ACU1006DVRA:
16.4ft. (5 m) from a local hub to the attached local equipment;
16.4ft. (5 m) from each remote unit to the attached remote equipment;
164 ft. (50 m) between a local hub and any Micro remote unit; 1000 ft. (304.8 m) between a local hub and any other
type of remote unit;
ACUREM, ACUSREM, ACUVREM, ACUWREM, ACUREMSW, ACU1006MRA:
16.4ft. (5 m) from the remote to the attached remote equipment; 1000 ft. (304.8 m) between a local hub and any other
type of remote unit;
ACUMREM, ACU1006MRVA:
16.4ft. (5 m) between the remote and the attached remote equipment;
150 ft. (45.7 m) between a local hub and the micro remote unit
NOTE: With
Resolution (Maximum) —
ACUREM, ACUSREM, ACUVREM, ACUREMSW: 1600 x 1280: 200 ft. (61 m);
1280 x 1024: 300 ft. (91.4 m);
1024 x 768: 1000 ft. (304.8 m);
ACUMREM, ACUWREM:
1280 x 1024: 150 ft. (45.7 m) Serial Characteristics —
ACU1006SRA, ACU1006DSRA, ACUSREM: Data rate: 9600 bps or 9.2 kbps, user selectable; Data format: 8 data bits, no parity, 1 stop bit (fixed);
ACU1006VRA, ACU1006DVRA, ACUWREM: Data rate: Up to 19.2 kbps;
Data format: 8 data bits, no parity, 1 stop bit (fixed); ACUVREM, ACU1006MRVA:
Data rate: Up to 19.2 kbps;
Data format: 8 data bits, no parity, 1 stop bit;
ACU1006RA, ACU1012RA, ACU1006DRA, ACU1006SRA, ACU1006DSRA, ACUREM, ACUSREM, ACUMREM, ACUREMSW, ACU1006MRA:
Flow control:
Hardware: RTS/CTS passed through or looped back, DTR/DSR passed through or looped back, or none
Software: Transparent to software flow control;
ACU1006VRA, ACU1006DVRA, ACUVREM, ACUWREM, ACU1006MRVA: Flow control: Transparent to hardware and software flow control
(RTS, CTS, DTR, and DSR are all passed through across the link) Synchronization — H/V or composite, TTL signal levels;
sync polarity is preserved Video Bandwidth (to
ACU1006RA, ACU1012RA, ACU1006DRA, ACU1006SRA, ACU1006DSRA, ACU1006VRA, ACU1006DVRA: 150 MHz per port;
ACUREM, ACUSREM, ACUVREM, ACUREMSW, ACU1006MRVA: Intrinsic: 300 MHz;
Across 328 ft. (100 m) UTP: 95 MHz (with equalization) Video Compensation —
With ACUMREM, ACUWREM, ACU1006MRA: For short- or
With all other remote units:
Video I/O Signal Levels — 0.7 volts peak to peak
User Controls —
ACU1006SRA, ACU1006DSRA:
(6) internal
(6)internal
ACUREM, ACUSREM, ACUVREM, ACUREMSW:
(3)internal
(1) internal
ACUSREM:
(1)internal
(1)internal
ACUMREM, ACUWREM:
(1)
ACU1006MRA, ACU1006MRVA:
(6)internal
ACUVREM, ACUWREM only:
(1)internal
(6)internal
Mean Time Between Failure (MTBF) — 40,000 hours
Interface —
Between local hubs and remote units: Proprietary composite of all supported types of computer I/O;
On local hubs to CPUs:
Proprietary composite of
ACU1006SRA, ACU1006DSRA, ACU1006VRA only: TIA/EIA
ACU1006VRA, ACU1006DVRA only: Bidirectional
ACU1006DRA, ACU1006DSRA, ACU1006DVRA: To local monitor: VGA;
To local keyboard and mouse: IBM PS/2 compatible; Remote units: Depending on the type of unit, either separate
or proprietary composite VGA video and IBM PS/2 compatible keyboard and mouse;
ACUREM, ACUSREM, ACUVREM, ACUREMSW, ACU1006MRVA only: TIA/EIA
ACUVREM, ACUWREM, ACU1006MRVA:
02/04/2010
#24985
blackbox.com | 3 of 5 |