Black Box IC136C manual Install Completed screen

Page 15

USB CARD

6.Click Next to continue. The Install Completed screen appears. See Figure 3-6.

Figure 3-6. “Install Completed” screen.

7.Click Finish to continue.

8.Attach the USB peripheral on the USB connector. Reboot the system after installation is complete.

14

Image 15

Contents USB Card FCC and IC RFI Statements Trademarks Used in this Manual Contents Interface PCI SpecificationsFeatures IntroductionOverview What the Package Includes System RequirementsInstalling the USB Driver InstallationHardware Installation Add New Hardware Wizard screen Installing the USB Card in WindowsWhat do you want Windows to do? prompt Specify a Location prompt Selecting the updated driver Click Next to continue. See Figure Install Completed screen Device Manager tab Install the software automatically Installing the USB Card in Windows XPClick Continue Anyway. See Figure 10. Completing the Found New Hardware Wizard screen 11. Device Manager tab Appendix Troubleshooting Problem/SolutionCalling Black Box Shipping and Packaging Copyright 2003. Black Box Corporation. All rights reserved