Black Box LPJ024A-FM, LPJ008A-FM, LPJ016A-FM, LPJ016A-TM, LPJ008A-T Table B-1 . Snmp MIB

802.3af and 802.3at PoE Gigabit Injectors

	Table B-1 (Continued). SNMP MIB.
OID	Name	Type	Value	Description
2.3.6.1.24852.2.2.14.0	poeSystemControlDCPower***	INTEGER	Read-write	Sets the value of available
				power in watts to be sup-
				plied by secondary (DC)
				power source.
2.3.6.1.24852.2.2.15.0	poeSystemControlBothPower***	INTEGER	Read-write	Sets the value of the total
				available power in watts
				to be supplied by both
				power sources.
2.3.6.1.24852.2.3.1.1.1~24	poePortIndex	INTEGER	Read-only	A unique value for each
				port.
2.3.6.1.24852.2.3.1.2.1~24 poePortPowerEnable		INTEGER	Disable (1)	Setting this object at a
		(1.2147483647)	Enable (2)	value enable (2) enables
				the detection mechanism
				for this port.
				Setting this object at a
				value disable (1) disables
				the detecton mechanism
				for this port.
2.3.6.1.24852.2.3.1.3.1~24 poePortControlMaxPower***		INTEGER	Read-write	This command specifies
				the maximum power in
				[watts] to the port.
2.3.6.1.4.1.24852.2.3.1.4.0 poePortCurrentStatus***		INTEGER	undercurrent(1)	Describes a current port
			overCurrent(2)	status related to the
			both(3)	power generation. The
			ok(4)	value undercurrent(1)
				indicates that the port
				current is below the mini-

mal value since the attri- bute was last cleared.

The value overCurrent(2) indicates that the port current exceeds the maxi- mum value since the attri- bute was last cleared. The value both(3) indicates that both undercurrent and overCurrent were detected since the attri- bute was last cleared. The value ok(4) indicates nei- ther an undercurrent or an overcurrent condition has been detected since the attribute was last cleared.

Page 38 724-746-5500 blackbox.com