Black Box MediaCento HX Transmitter and Receivers, VSPX-HDMI-CSRX, VSPX-HDMI-RX manual Installation

Page 23

Chapter 4: Installation

4. Installation

To broadcast HDMI signals to four remote displays with a local port, follow these instructions.

1.Turn off all devices, including sources and displays.

2.Connect an HDMI source (such as a Blu-ray disc player) to the HDMI port on the transmitter.

3.Connect the receivers via CAT5/5e/6 cables to each HDMI signal output port.

4.Connect the local HDMI equipped monitor.

5.Set EDID DIP switch settings of the transmitter according to your displays

(Chapter 3).

6.If the monitor’s resolution or refresh rate differs from the extender’s built in

EDID settings, set DIP switch to EDID learning to copy the EDID from the local monitor (Section 3.2).

7.Plug in the 5-VDC, 4-A power supplies.

8.Power on the HDMI displays.

9.Power on the HDMI source device.

10.If you see a flickering or blinking image on the remote displays, adjust the rotary control switch on the receivers to adjust the video signal strength (see Table 2-2 or 2-3).

11.If you are installing several VSPX-HDMI-CSRX units in a cascade setup, always start by adjusting signal strength on the unit nearest the transmitter, and move on to the adjacent units.

VSPX-HDMI1X4-TX

VSPX-HDMI-RX

HDMI source

Local HDMI

HDMI output

monitor

monitor

Figure 4-1. Connection diagram.

724-746-5500 blackbox.com

Page 23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Chapter Extend Hdmi signals over CATx cableTrademarks Used in this Manual Trademarks Used in this ManualFCC and IC RFI Statements/NOM Statement Normas Oficiales Mexicanas NOM Electrical Safety StatementNOM Statement Safety Notice NOM Statement/Safety NoticeTable of Contents Specifications SpecificationsSpecifications Overview Introduction FeaturesOverview Additional Features for VSPX-HDMI-CSRX Additional Features for VSPX-HDMI1X4-TXAdditional Features for VSPX-HDMI-RX Hardware Description 1 1 x 4 Transmitter VSPX-HDMI1X4-TX What’s IncludedTransmitter’s back panel SW1 Receiver’s front panel Receiver VSPX-HDMI-RXHdmi signal level varies from Cascadable receiver’s front panel Cascadable Receiver VSPX-HDMI-CSRXSurround sound audio output, adjust Connection diagram #1 Application DiagramsVSPX-HDMI1X4-TX VSPX-HDMI-CSRX VSPX-HDMI1X4-TX Configuration Switch Settings on the Transmitter ConfigurationEdid Learning Installation InstallationPin Definitions 5.1 Hdmi Pin DefinitionsRJ-45/CATx Performance Guide Shipping and Packaging TroubleshootingTroubleshooting Contacting Black Box About Black Box

MediaCento HX Transmitter and Receivers, VSPX-HDMI-CSRX, VSPX-HDMI1X4-TX, VSPX-HDMI-RX specifications

The Black Box VSPX-HDMI-RX, VSPX-HDMI1X4-TX, VSPX-HDMI-CSRX, and MediaCento HX Transmitter and Receivers are cutting-edge solutions for professional audio-visual applications. These devices are designed to ensure seamless, high-quality transmission of HDMI signals over long distances, making them perfect for various settings, including conference rooms, educational institutions, and large venues.

The VSPX-HDMI-RX is a versatile HDMI receiver that supports resolutions up to 4K at 60 Hz, ensuring that high-definition video can be displayed without any loss in quality. It can receive HDMI signals transmitted over CatX cabling, allowing for distances up to 328 feet (100 meters). This flexibility in cable choice is essential for installations where traditional HDMI cables would be impractical due to distance. It also features built-in EDID management, ensuring that the source device and display maintain compatibility, providing a reliable user experience.

The VSPX-HDMI1X4-TX is an HDMI distribution amplifier that takes a single HDMI input and splits it into four outputs. It supports the same impressive 4K resolution as the receiver and features HDMI loop-out capabilities, which allow for easy connection to additional devices or displays. The built-in technology ensures that the signal quality remains high across all outputs, making it a great choice for presentations where multiple displays are necessary.

The VSPX-HDMI-CSRX is a companion product designed to provide additional functionality in your HDMI installation. This device acts as a scaler, adapting the video output to match the capabilities of the connected display. Its support for various resolutions ensures that you can switch between different output devices without any issues.

The MediaCento HX Transmitter and Receivers take the concept of video distribution to the next level with support for both HDMI and USB signals. This system allows for the transmission of high-definition video alongside USB peripherals over a single network cable, simplifying installations that require interactive capabilities. The devices are capable of supporting 4K video resolution and can transmit signals over IP networks with extended distances, ensuring a clean and efficient data pathway.

Collectively, these products from Black Box offer a robust solution for anyone needing reliable video distribution across multiple displays, all while maintaining high resolutions and video quality. Their advanced technologies make them essential tools for modern AV setups. Whether used individually or as part of an integrated system, they provide versatility and exceptional performance for any audio-visual application.
Top Page Image Contents