Cooper Bussmann PS-EXP, PS-8, PS-6 manual Specifications and Ordering Information, Ps-Exp-Retro

POWERPATH™ Operating Modes (refer to Installation Manual):

Normal Mode: Provides constant 24 VDC output upon initiation by a voltage to input IN1 or IN2 or by a contact opening on DRY1 or DRY2. The unit returns to standby mode when the input is deactivated.

Wheelock Sync Mode: Provides signals for synchronization of patented Wheelock audible and strobe notification appliances. Audibles can also be silenced in this mode while the strobes continue to flash.

In>Out Sync Mode: Accepts a synchronization signal on the input to provide a coded output or synchronized output. This signal

may come from a FACP, another POWERPATH or a Wheelock DSM synchronization module. Caution: Do not use strobes on coded output circuits.

True Input Follower Mode: Accepts a coded signal on the input to provide a coded output with the same timing as the

input. The signal may come from a FACP, another POWERPATH or other coded source. Caution: Do not use strobes on coded output circuits.

Temporal Mode: Codes the output voltage in a code-3 temporal pattern to drive audible appliances such as horns,

bells or chimes. Caution: Do not use strobes on coded output circuits.

Specifications and Ordering Information

Model Number		Order	Input Voltage/Current			Approvals
		Code
					UL		CSFM	FM
PS-6		105530	6 amp, red enclosure		X		X	X
PS-6B		100257	6 amp, black enclosure		X		X	X
PS-8		105531	8 amp, red enclosure		X		X	X
PS-8B		105830	8 amp, black enclosure		X		X	X
PS-6EXP		105083	6 amp power supply with preinstalled expansion module		X		X	X
PS-8EXP		105084	8 amp power supply with preinstalled expansion module		X		X	X
PS-EXP		105534	4 class B or 2 class A expansion module		X		X	X
PS-EXP-RETRO		105527	Field upgrade kit for models prior to January 2010#		X		X	X
Input Circuit			Input Voltage and Current		X= Approved
Input voltage Range			8 to 33 VDC
					*= Pending
Input Current @ 12 VDC			0.005 amps		#=Contact Technical
					Support for additional
Input Current @ 24 VDC			0.005 amps
					inforamation on upgrade
Output Circuit			Output Voltage and Current		options
Four (4) Class B or
Two (2) Class A or			24 VDC @ up to 3 amps per curcuit
One (1) Class A and Two (2) Class “B” or
8 Class B or 4 Class A
(optional PS-EXP module necessary)
Continuous duty up to 3 Amps per circuit, up to 4 Amps maximum per panel
Standby Current			0.129 Amps
Alarm Current			0.129 Amps
Primary PS-6 (120 VAC models)			105 to 130 VAC, 50/60 Hz @ 4.25 Amps
Primary PS-8 (120VAC models)			105 to 130 VAC 50/60 Hz @ 5.32 Amps
Primary PS-6E (240 VAC models)			210 to 260 VAC, 50/60 Hz @ 2.42 Amps
Primary PS-8E (240 VAC models)			210 to 260 VAC 50/60 Hz @ 3.22 Amps
Secondary Power Charging Capacity			32 Amp hours @ 0.750 Amps per hour
	Enclosure can house up to two 12 AH batteries
Aux Output
CP Mode	PS-6 up to 75 mA		PS-8 up to 250 mA
MP Mode	2.5A during non alarm
Model	Dimensions		Weight	Comments
PS-6/PS-6B	17”H x 13”W x 3.5”D		11.5lbs. (Ship) 9.4lbs (Unit)	Small profile
PS-8/PS-8B	17”H x 15”W x 5.5”D		17.7lbs (Ship) 15.6lbs (Unit)	Additional room for modules
PS-EXP	4.3”H x 3.7”W x 1”D		1lb. (Ship & Unit)	Plugs into main pcb on all
				models