Xerox 2314 manual Getting Started

Page 14

11Mbps Wireless Internet Broadband Router

2.2.2 Getting Started

You may complete the following steps to install your Wireless Internet Broadband Router when you have all the information mentioned above on hand.

Step 1. Power all devices down. This should include your PCs, Cable or DSL modem and the Router.

Step 2. Connect the Router to your PCs.

A. Connect one end of a standard network cable to the 10/100 RJ-45 LAN ports on the back of the Wireless Access Point Router.

B. Connect the other end of the cable to the PC.

Step 3. Connect the Router to your Cable or DSL modem.

A.Connect one end of a standard network cable to the RJ-45 WAN port on the back of the Wireless Access Point Router.

B.Connect the other end of the cable to either a Cable or DSL modem

Step 4. Supply the power to the Router.

A.Connect one end of the power cable to the Wireless Access Point Router.

B.Connect the power cube end of the power cable to a standard wall outlet.

When the Router receives power, the Power LED should remain solid Green.

Step 5. Supply the power to either your Cable or DSL modem.

Step 6. Press the Reset button to restore the Wireless Access Point Router‘s default settings. Hold the button in for three seconds, or until the Diag LED illuminates red.

13

Image 14

Contents Ansel Wireless BroadBand Router User Guide VersionFederal Communications Commission FCC Requirements, Part FCC CertificationsProhibition of co-location Regulatory information / Disclaimers MPE Statement Safety InformationSafety Information CE Mark Warning Contents Specifications System Requirement IntroductionBefore You Start How to Use this Guide Product Description Hardware InstallationFeatures OverviewLEDs and Reset Button Front PanelColor Function Link Color FunctionLink/Act ActRear Panel All Port FunctionalityInstalling the Router Preparing for InstallationGetting Started Configuration Configuring the Wireless Access Point RouterSetup Wizard PPPoE Connection for WAN User Name and PasswordService Name Connect on Demand4Cable/DSL Setup Menu Screen Max Idle TimeFixed IP for WAN 8DNS Menu Screen Pptp For WAN Alias IP Setup Dynamic IP for WAN11Alias IP Setup 6 DNSWireless Configuration 12 DNSWEP Time 14 Time ZoneStatus Firewall SettingsBrowsing the Status Wireless Status 15Status Menu ScreenDhcp Table Routing TableDdns Status Screen 18Routing Table Menu ScreenViewing the Tools System LogHacker Log 20 System LogReset UpgradeSetup the Advanced Features BackupLAN IP Setting Dhcp SettingNumber of Dhcp Users Firewall SettingDo you want to enable Dhcp Server on this router? Starting IP Address28DMZ Host IP Address enabled Privilege Virtual Servers 29Privilege Menu Screen11Mbps Wireless Internet Broadband Router Routing Static RoutingGateway IP Destination LAN IPSubnet Mask Dynamic RoutingWAN MAC Clone 32Static Routing and Dynamic Routing Menu ScreenDdns Setting 33WAN MAC Address Clone34DDNS Setting Screen MAC Control 35MAC Control ScreenConfiguring your PCs to Connect to the Router 36Network Box Screen37 TCP/IP Properties Specifications Technical SpecificationsStandard Conformance Cable SpecificationsEnvironmental Information 1Diagram of Straight Through Cables Appendix a About Static and Dynamic IP Address Appendix B Warranty Statement