CONNECTIONS
DETACHING THE WALL MOUNT
1.Pull the Soundbar upwards as shown in the figure to separate
it from the wall mount.
Using the Soundbar with Wall Mount
[Detaching the Soundbar from the Wall Mount]
● Do not hang onto the installed unit and avoid striking or dropping the unit.
●Secure the unit firmly to the wall so that it does not fall off. If the unit falls off, it may cause an injury or damage the product.
●When the unit is installed on a wall, please make sure that children do not pull any of the connecting cables, as it may cause it to fall.
●For the optimal performance of a wall mount installation, install the speaker system at least 2 inches (5 cm) below the TV, if the TV is mounted on the wall.
●For your safety, if you do not mount the unit on the wall, install it on a secure, flat surface where it is unlikely to fall.
INSTALLING THE BRACKET WITHOUT REFERRING TO THE
| 2 inches |
|
|
|
|
|
| 2 inches | ||
(5 cm) or more |
|
|
|
|
|
| (5 cm) or more | |||
|
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 6.3 inches |
| 6.9 inches | ||||
|
|
|
| (16 cm) |
| (17.5 cm) | ||||
Minimum 12.9 ~ 13.2 inches
(32.8 ~ 33.5cm)
1.Place the “Wall Mount L” on the desired wall surface while paralleled to the floor as shown above, and fix a screw through the hole on its right end.
2.Place the “Wall Mount R” on the desired wall surface while paralleled to the floor as shown above, and fix a screw through the hole on its left end.
•If Wall Mount L/R are to be mounted beneath the TV, check their fixing hole positions in steps 1 and 2, so that they are aligned appropriately to the center of the TV’s bottom.
3.Fix screws through the rest of holes.
12