connections
INSTAllING THE CRADLE STAND
You can use the cradle stand to install this unit on a shelf. Make sure you place the unit on a flat surface.
CONNECTING
Slide the cradle stand into the speaker until you hear a click.
•Make sure the slot on the cradle stand is facing forward when connecting.
DISCONNECTING
Press the button to disconnect the cradle stand from the unit.
INSTAllING THE WAll MOUNT
You can use the wall mount bracket to mount this unit on the wall.
1.Place the wall mount bracket on a wall surface and then
secure it with two screws (not supplied).
2.Then, fit the unit into the corresponding slots of the wall mount bracket. For secure installation, make sure the
mounting studs slide firmly down into the bottom of the slots.
3.This is the completion of the suggested wall mount installation.
12
▪ Secure the unit firmly to the wall so that it does not fall off. If the unit falls off, it may result in an injury or damage to the product.
▪ When the unit is installed on a wall, please make sure that a child does not pull any of connecting cables, as it ma y cause it to fall.
▪ For the optimal performance in a wall mount installation, keep the speaker system at least 2 inches (5cm) distant from the TV.