FREEFLOW PRINT SERVER 6.0.xx
W-1 data element definitions
Primary Network Interface:
Product | Controller/Server | Value |
|
|
|
iGen3 | PDSI Config 4 | bge0 |
|
|
|
DocuColor (2XX, 5000, | PDSi Config 2b, | bge0 |
7000/8000) | 2c, 2d |
|
|
|
|
DocuTech 61XX | PDSi Config 2a | bge0 |
DocuPrint 1XX EPS |
|
|
|
|
|
DocuTech 61XX | SUN W1100z | Determined |
DocuPrint 1XX EPS |
| automatically |
|
| |
|
|
|
DocuTech 128/155/180 | PDSi Config 2a | bge1 |
HLC |
|
|
|
|
|
DocuTech 128/155/180 | SUN W1100z | ce1 |
HLC |
|
|
|
|
|
Xerox 41XX/45XX EPS, | SUN Ultra 20 | Determined |
XXP |
| automatically |
|
|
|
Xerox Continuous Feed | PDSi Config 4 | bge1 |
|
|
|
Nuvera | X86 | Determined |
|
| automatically |
|
|
|
DHCP: Dynamic Host Configuration Protocol. This is a TCP/IP addressing method. If selected, the system should automatically contact the DHCP server to obtain the IP address, subnet mask, and default gateway address. This information can also be manually entered into the FreeFlow Print Server Network Configuration screens.
DHCP is the default for DocuColor 2XX. iGen3 may not use DHCP.
Hostname: This is the name the print server will be known as by users from other host machines on the TCP/IP network. This name is an alias mapped to the IP address that is assigned to the print server/host machine. The Hostname must start with an alphabetic character, and cannot start with a number, space, or any other
IP Address: The lP or Internet Address is a unique 4 byte, 32 bit numeric value that is assigned to each local host and workstation on a TCP/IP network. An IP address consists of four fields, each separated by a decimal point. For example: 13.254.166.111.
NOTE: The TCP/IP Internet spans the entire world. The Internet central committee assigns a set of unique network addresses to
XEROX FREEFLOW PRINT SERVER | 7 |
GETTING READY FOR THE PRINT SERVER INSTALLATION |
|