NgtheFMandAMAntennas, Hat is Anynet? | Samsung DS660T instruction

to Connect to Anynet

Anynet function, the DVD Home Theater System can be conveniently controlled from your Samsung TV. By connecting the Anynet output terminal on the DVD Home Theater System to the input terminal of any Samsung Anynet-enabled device, both can be controlled from your TV. For detailed operation instructions and connection diagram, refer to the user's manual of your Anynet-enabled TV.

'i hat is Anynet?

ngtheFMandAMAntennas

If AM reception is poor, connect an outdoor AM antenna(not supplied).

•The Anynet function allows you to use your TV'sremote control and menu to control all AV devices.

•However, this function is available only with Samsung Anynet-enabled models.

Other AV devices

SamsurlgDVD player]

SamsungVCR

SamsungSebTopBox]

Use thisto connectAnynet-enabled

AV deviceswhen necessary.

FM (7_n)

Antenna

(supplied)

Snap the tabs on the loop into the slots of the base to assemble the

AM loop antenna.

1Connect the Anynet input terminal on the back of this unit to your Samsung TV'sAnynet output terminal.

2 Connect the Anynet Out Terminal on the back of this unit to the Anynet input of Samsung external AV devices.

1, Connect the FM antenna supplied to the FM 75_ COAXIAL terminal as a temporary measure.

2.Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface.

Beforeattachinga 75_ coaxialcable (witha standard

I• If receptionis poor,disconnectan outdoorantenna.

type connector), the suppliedFM antenna.

1.Connect the AM loop antenna supplied to the AM and _ terminals.

2.If reception is poor, connect an outdoor single vinyl-covered wire to the AM terminal. (Keep the AM loop antenna connected).

3Refer to the user'smanual of your Anynet-enabled TV and activate the Anynet function.

*This function is available only with Anynet-enabled TVs.

•If the Anynet input and output terminals are reversed, communication with the TV will fail and you will not be able to use the Anynet function.

Cooling Fan Thecoolingfan dissipatesthe heatgeneratedinsidethe unit so thatthe unit can beoperated normally.Thecoolingfan is activatedautomaticallyto supplycoolairto the unit.

Please observe the following cautions for your safety.

•Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature insidethe unitcould rise and may damageit.

•Do not obstructthe coolingfan or ventilation hoies.(If the cooling fan or ventilation holes are coveredwith a newspaperor cloth, heat may build up insidethe unitand fire may result.)