DocuColor 7002/8002 | Exercises |
5.Reposition green handle 4a.
4a
4b
6.The Fuser area is on the right hand side of the Paper Transport module. Lift handle 4c on the right hand side and pull to open.
7.Lift up handle 4d until it stops and clear any jammed paper. Rotate knob 4e in the direction of the arrow on the knob to clear any paper that is caught.
Note
Occasionally a sheet of paper wraps around the heat roll. (The heat roll is visible when handle 4d is up). DO NOT attempt to remove this sheet of paper because the stripper fingers may be damaged if you attempt this procedure. Call your Xerox service representative to remove this piece of paper.
8.Reposition green handle 4d and close area 4c. Ensure these are firmly in place.
4d
4e
4c
9.Grasp handle 4 and slowly push in the Paper Transport until it stops. Turn the handle in the direction of the arrow to lock the module in place.
10.Close the Right and Left Front Doors.
11.Follow the instructions on the UI to restart your print job.
Quick Start Guide | 15 |