Xerox 96 manual Loading trays 3, 4, 5

FEEDER TRAYS

Loading trays 3, 4, 5, and 6

1.Select the tray you want to load by pressing the Tray Unlock button on the door of the paper tray or by touching the appropriate unlock icon on the printer console.

Note: If the printer has stopped due to a low paper condition, you do not need to press the Tray Unlock button.

2. Wait until the Ready to Open indicator lights.

3.Pull the feeder tray out until it stops.

4.Slide both length guides away from the paper. For the rear guide, squeeze the lever against the back of the length guide and slide the guide toward the back of the printer.

5.Remove any paper remaining in the tray and set it aside to be placed on top of the new paper.

1-6 XEROX DOCUPRINT 96/4635/180 NPS GUIDE TO PERFORMING ROUTINE MAINTENANCE