Samsung HT-Z110 Listening to Radio, Remote Control Unit, Main Unit Tune in to the desired station

Listening to Radio

Presetting Stations GB

Remote Control Unit

Example: Presetting FM 89.1 in the memory

1Press the TUNER button and select the FM band.

Main Unit

2 Tune in to the desired station.

Automatic Tuning 1	When	is pressed, a
	preset broadcast station is
	selected.
	Press and hold TUNING(
Automatic Tuning 2			,	)
	to automatically search for active
	broadcasting stations.
Manual Tuning	Briefly press TUNING( ,			) to

increase or decrease the frequency incrementally.

1Press the TUNER button and select the FM band.

Press TUNING		Press the TUNER
2 ( , ) to select	3
		MEMORY button.
"89.10".
• Refer to Step 2 on page 61 to	• “PRGM” flashes in the display.
automatically or manually tune in
to a station.

1Press the FUNC- TION button to select the FM band.

2 Select a broadcast station.

Automatic Tuning 1	Press the STOP ( )
	button to select

PRESET and then press button to select the preset station.

Automatic Tuning 2 Press the STOP ( )

button to select "MANUAL"

and then press and hold button to automatically search the band.

Manual Tuning Press STOP ( ) to select MANUAL and then briefly

press to tune in to a lower or higher frequency.

	Press	5	Press the TUNER	To	preset another
4 to select preset			MEMORY button	6 station, repeat steps
number.			again.	2 to 5.

•You can select between 1 and 15 presels.

Note • This unit does not receive AM broadcasts. RADIO OPERATION

Press MO/ST button to listen in Mono/Stereo.

(This applies only when listening to an FM station.)

To tune in to a preset station, press on the remote control to select a channel.

55	• Each time the button is pressed, the sound switches between "STEREO" and "MONO".	56
	• In a poor reception area, select MONO for a clear, interference-free broadcast.