Before using your home cinema
The DVD Home Cinema's remote can be used to control Samsung TV's.
1.Plug the main unit's power cord into the AC power supply.
. Press the DVD rECEIVEr button to switch to DVD RECEIVER mode to operate the DVD Home Cinema.
. Press the FUNCTION button on the main unit or DVD
button on the remote to enable DVD/CD playback.
4. Press the TV button to set the remote to TV mode.
. Press the POWEr button to turn on your Samsung TV with this remote.
. Press the SOUrCE button to select VIDEO mode on your TV.
VIDEO
ENG
● BEFOrE USING YOUr HOME CINEMA
Selecting the Video Format
Press and hold the Number 7 button on the remote controller for over 5 seconds while the power is turned off.
~ By default, the video format is set to "PAL".
~ "NTSC" or "PAL" will appear in the display. At this time, press the Number 7 button shortly to select between "NTSC" and "PAL".
~ Each country has a different video format standard.
~ For normal playback, the video format of the disc must be the same as the video format of your TV.