Symptom | Check/Remedy |
• Disc is rotating but no | • Is the TV power on? | |
picture is produced. | • Are the video cables connected properly? | |
• Picture quality is poor and | • Is the disc dirty or damaged? | |
• A poorly manufactured disc may not be playable. | ||
picture is shaking. | ||
|
•Is the remote control being operated within its operation range of
The remote control does not | angle and distance? |
| ||||
work. | • Are the batteries exhausted? |
| ||||
• Have you selected the mode(TV/DVD) functions of the remote | ||||||
| control (TV or DVD) correctly? |
| ||||
|
|
|
| |||
Audio language and | • Audio language and subtitles will not work for DVDs not containing | |||||
subtitles do not work. | them. And depending on the disc, they may work differently. | |||||
|
|
|
|
|
| |
Menu screen does not appear even | • Are you using a disc that does not contain menus? | |||||
when the menu function is selected. | ||||||
|
|
|
|
| ||
|
|
|
| |||
Aspect ratio cannot be | • You can play 16:9 DVDs in 16:9 WIDE mode, 4:3 LETTER BOX | |||||
changed. | mode, or 4:3 PAN SCAN mode, but 4:3 DVDs can be seen in 4:3 | |||||
ratio only. Refer to the DVD disc jacket and then select the | ||||||
| appropriate function. |
| ||||
|
|
|
|
| ||
Can't receive radio | • Is the antenna connected properly? |
| ||||
broadcast. | • If the antenna's input signal is weak, install an external FM | |||||
antenna in an area with good reception. | ||||||
|
|
|
|
|
| |
• The main unit is not working. |
|
|
|
|
| |
|
|
|
|
| ||
• Turn off the power and hold the | button on the main unit for | |||||
(Example: The power goes out or | ||||||
longer than 5 seconds. |
| |||||
strange noise is heard.) |
| |||||
|
|
|
|
| ||
• The DVD player is not | Using the RESET function will erase all stored settings. | |||||
working normally. | Do not use this unless necessary. |
| ||||
|
|
|
|
| ||
|
|
|
| |||
The password for rating | • While “NO DISC”message appears on the display of main unit, hold | |||||
the main unit's | button for longer than 5 seconds. “INITIALIZE” | |||||
level has been forgotten. | appears on the display and all settings will return to the default values. | |||||
• Press the POWER button. |
| |||||
| Using the RESET function will erase all stored settings. | |||||
| Do not use this unless necessary. |
|
MISCELLANEOUS
76