Xerox 265 LP, 240 LP, 255 LP, 265 ST, 255 ST, 240 ST manual Before You Start, Go to the printer

Page 1

OS/2 TCP/IP Peer-to-Peer Network Quick Install Card Xerox Document Centre 240/255/265 LP/ST

Before You Start

c) The Touch Screen will be used for the

If your printer is equipped with a Token Ring

remainder of the data entry.

3. Enter the Network Setup menus.

interface, use the Token Ring Quick Install

Card supplied in this Quick Install Card set to

a) Wait for the screen to refresh and

set the Ring Speed and Source Routing settings

press the Connectivity and Network

for your environment.

Setup button.

 

Record the following information

b) Wait for the screen to refresh and

IP Address ____________________________

press the Network Setup button.

c) PresstheTCP/IPOptionsbutton.

 

Subnet Mask ___________________________

 

 

Default Gateway ________________________

 

 

You will compute your Broadcast Address as

 

 

part of this procedure.

 

 

Go to the printer and...

 

 

1. Connect your Document Centre to the

 

 

network with the appropriate cabling.

 

 

2. Enter the Tools pathway.

 

 

a) Press the Access ( )button.

 

 

b) On the keypad enter 1111 or the

 

 

current password. Press the Enter

 

 

button when finished. If your printer is

 

 

an ST model press the Go to Tools

 

 

button, otherwise skip to the next step.

 

 

 

 

 

For assistance, contact your local Xerox Customer Support Center:

Page 1

USA: 1-800-821-2797 Canada: 1-800-939-3769

 

4. Enable the network interface and protocol.

a)Press the TCP/IP Settings button.

b)Press the Protocol and Media button.

c)Press the Enable button, once pressed the Physical Media buttons will appear, select Ethernet or Token Ring. Press Save to retain the settings and continue.

5.Set the Broadcast Address.

a)Press the Broadcast Address button.

b)The broadcast address can be calculated this way: Perform a logical OR of the IP address and the complement of the Subnet Mask.

Example of logical OR method:

IP Address = 13.175.109.146

Subnet Mask = 255.255.252.0

IP Address

00001101.10101111.01101101.10010010

Complement of Subnet Mask

00000000.00000000.00000011.11111111

The result

00001101.10101111.01101111.11111111 Broadcast Address = 13 . 175 . 111 . 255

Image 1
Contents Go to the printer Before You StartGo to a workstation Wait a Minimum of 7 minutes for the printer to resetPress the Host Name and Address button Press the Subnet and Gateway button