Product: Nuvera 100 EA Digital Production System | PSDS No.: 0997 | |
Nuvera 120 EA Digital Production System |
| |
Section V - Emission/Exposure Information |
| |
Light Source | FDA Accession No. | |
Class 1 laser system for xerographic exposure. | ||
There is no access to laser light during |
| |
operation/maintenance or service. |
| |
Electromagnetic Emissions |
| |
US | FCC: Class A |
|
Canada | DOC: Class A |
|
Audible Noise |
| |
Run | dBA: 64 | Bel(A): 8.1 |
Standby | dBA: 40 | Bel(A): 5.7 |
Impulse | dBA: 70 |
|
Chemical Emission Testing per ECMA 328
Ozone – 0.02 mg/m3
Concentration Based on Simulation Model:
Daily Copy Volume 57,600 impression / 8 hours
Room Size 47 m3
Particulates – 0.025 mg/m3
TVOC’s – 0.009 mg/m3
Section VI - Product Recycling and Disposal
Xerox operates a worldwide equipment takeback and reuse/recycle program. Contact your Xerox sales representative
If you are managing the disposal of your Xerox product, please note that the product contains lead, mercury and other materials whose disposal may be regulated due to environmental considerations. The presence of lead and mercury is fully consistent with global regulations applicable at the time that the product was placed on the market. For recycling and disposal information, contact your local authorities. In the United States, you may also refer to the Electronic Industries Alliance web site: www.eiae.org.
All measurements were made on products performing within established operating specifications and received recommended maintenance procedures. Xerox certifies that this product meets or exceeds the applicable standards for safety and emissions.
www.xerox.com Reference “About Xerox”