Samsung HT-BD8200 Audio setup, Setting UP the Speaker Options, Dynamic Compression, AV Sync

Audio setup

SETTING UP THE SPEAKER OPTIONS

Dynamic Compression

This is only active when a Dolby Digital signal is detected.

• On : When Movie soundtracks are played at low volume or		Music
		System
		Photo
from smaller speakers, the system can apply appropriate		Language
	DVD	Setup Audio	◄	Dynamic Compression : On On			►
compression to make low-level content more intelligible and
						Off
		Display		AV Sync	:	50msec
prevent dramatic passages from getting too loud.		HDMI		Test Tone
		Network		Speaker Distance

• Off : You can enjoy the movie with the standard Dynamic	Parental
	Sound Edit
Range.

AV Sync

ENG

● AUDIO SETUP

Video may look slower than the audio when the player is

connected to a digital TV. If this occurs, adjust the audio

delay time to match the video.

•You can set the audio delay time between 0 ms and 300 ms. Set it to the optimal status.

Setting the Test Tone

	Music	System
	Photo
		Language		Dynamic Compression	: On
DVD	Setup	Audio	◄	AV Sync	:	50msec0msec
		Display		Test Tone		25msec
		HDMI		Speaker Distance		50msec

Network	Sound Edit	75msec
Parental		100msec
		125msec

Use the Test Tone feature to check the speaker connections.

			Music
1.	With the unit in Stop mode, press the MENU button.		System
			Language
			Photo
2.	Press the ▲▼◄► buttons to select Setup, then press the	DVD	Setup Audio	◄	Dynamic Compression : On		►
			Display		AV Sync	: 50msec
	ENTER or ► button.
			HDMI		Test Tone
3.	Press the ▲▼ buttons to select Audio, then press the		Network		Speaker Distance
			Parental
					Sound Edit

ENTER or ► button.

•Audio setup menu will be displayed.

4.Press the ▲▼ buttons to select Test Tone, then press the

ENTER or ► button.		Music	System		Dynamic Compression : On
		Photo
			Language		AV Sync	: 50msec
5. Press the RED(A) button
	DVD	Setup	Audio	◄	Test Tone	►
• A test tone will be sent to L R	LFE in order so you		Display		Speaker Distance
			HDMI		Sound Edit

can make sure the speakers are set up correctly.	Network
	Parental

6.To end the test tone, press the RED (A) button again.

M Press the RETURN button to return to the previous menu.

When playing a BD/DVD or CD, this will work only in Stop mode.

Use this function to check that each speaker is correctly connected and that there is no problem.

When HDMI AUDIO is on (audio is produced through TV speakers), the TEST TONE function is not available.

37