Samsung D5500 user manual Network Status, BD-LIVE Internet Connection, One Foot Connection

WPS(PBC)

The easiest way to set up the wireless network connection is using the WPS(PBC) function or the One Foot Connection function.

If your wireless router has a WPS(PBC) button, follow these steps:

1.Press the ▲▼ buttons to select WPS(PBC).

Settings

Network Settings

Display

Select a network connection type.

		03
2.	Press the ENTER button.	Setup
3.	Place the Samsung Wireless Router within
	25 cm (10 inches) of your product to
	connect.
4.	Wait until the connection is automatically
	established.

Network Status

Check whether a connection to the network and the Internet have been established.

Audio

Network

System

Wired

Wireless

Language (general)

Connect to the Wireless Router easily by pressing the

Security WPS(PBC) WPS(PBC) button. Choose this if your Wireless Router

Generalsupports Push Button Configuration(PBC).

One Foot

Support Connection

> Move " Enter ' Return

2.Press the ENTER button.

3.Press the WPS(PBC) button on your router within two minutes. Your product displays the Network Selection Screen, and automatically acquires all the network settings values it needs and connects to your network. When it is done, it displays an OK button. Press the ENTER button on your remote.

One Foot Connection

You can set up the wireless connection automatically if you have a Samsung Wireless Router which supports One Foot Connection. To connect using the One Foot Connection function, follow these steps:

1.Press the ▲▼ buttons to select One Foot Connection.

Settings

Network Settings

Display

Select a network connection type.

Audio

Network

Wired

System

Wireless

Language (general)

Connect to your wireless network automatically if your

Security WPS(PBC) Wireless Router supports One Foot Connection. Select

General One Foot this connection type after placing the Wireless Router within 10 inches(25cm) of product.

Support Connection

> Move " Enter ' Return

Settings		Network Status
Display		MAC Address	XX:XX:XX:XX:XX:XX
Audio		IP Address	0.0.0.0
Network	KT_WLAN	Subnet Mask	0.0.0.0
		Gateway	0.0.0.0
System		DNS Server	0.0.0.0

Cannot connect to the Wireless Router. Try the following. Language

- Ensure the Wireless Router is powered on and try re-setting the power of the SecurityWireless Router.

- Check the security key if the Wireless Router has a security key.

General

SupportNetwork Settings IP Settings Retry OK

<Move " Enter ' Return

BD-LIVE Internet Connection

Set to allow or prohibit an Internet connection when you use the BD-LIVE service.

•Allow (All) : The Internet connection is allowed for all BD-LIVE contents.

•Allow (Valid Only) : The Internet connection is allowed only for BD-LIVE contents containing a valid certificate.

•Prohibit : No Internet connection is allowed for any BD-LIVE content.

✎NOTE

What is a valid certificate?

When the product uses BD-LIVE to send the disc data and a request to the server to certify the disc, the server uses the transmitted data to check if the disc is valid and sends the certificate back to the product.

The Internet connection may be restricted while you are using BD-LIVE contents.

English 41

HT-D5500_XAA_0208.indd 41 2011-02-09 ¿ÀÀü 2:43:38