Samsung HT-X710 user manual Been forgotten, Return to the default values, Press the Power button

SYMPTOM Check/Remedy

•The main unit is not working. • Turn off the power and hold the STOP (@) button on the

(Example: The power goes out remote control for longer than 5 seconds. STAND BY RED

or strange noise is heard.)	LED blinks on the display and all settings will return to the
• The DVD player is not working	default values.
normally.
	Using the RESET function will erase all stored settings.
	Do not use this unless it is necessary.
The password for rating level has	• While “NO DISC” message appears on the display of main
been forgotten.	unit, hold the main unit's STOP (@) button for longer than 5
	seconds. “INITIAL” appears on the display and all settings will
	return to the default values.
	• Press the POWER button.
	Using the RESET function will erase all stored settings.
	Do not use this unless it is necessary.
Can't receive radio broadcast.	• Is the antenna connected properly?
	• If the antenna's input signal is weak, install an external FM
	antenna in an area with good reception.

EnG

● troubleshooting

53