Samsung HT-AS720S instruction manual Setting the speaker mode, Using the SPK Select button

Setting the speaker mode

Signal outputs and frequency response from the speaker will be adjusted according to your speaker configuration and whether certain speakers are used or not.

√

REMOTE CONTROL

1 Press SETUP/MENU button, and then press the ENTER button.

• “SETUP MODE” appears on the display and goes into Setup Mode.

2 Press button to select the “SPK SETUP”, and then press the ENTER button.

3 Press button to select the speaker you want.

• Each time you press this button, FRONT ➝ CEN ➝ SURR ➝ S.BACK ➝ SUB ➝ CROVR will be selected in turn.

4 Press …† button to set the mode (LARGE, SMALL etc.) for the selected speaker.

5 Repeat steps 3-4 to set the mode for each speaker.

To exit setup mode

•Wait for about 5 seconds or press SETUP/MENU button.

“SETUP OFF” appears on the display and Setup Mode is exited.

Using the SPK SELECT button

1 Press SPK SELECT button to select the speaker you want.

•Each time you press this button, FRONT ➝ CEN ➝ SURR ➝ S.BACK ➝

SUB ➝ CROVR will be selected in turn.

2 Press …† button to set the mode (LARGE, SMALL etc.) for the selected speaker.

3 Repeat steps 1-2 to set the mode for each speaker.

To turn the SUBWOOFER on or off.

Press SUBWOOFER button on the remote.

ENG

MAIN UNIT

1 Press SETUP button, and then press the ENTER () button.

•“SETUP MODE” appears on the display and goes into Setup Mode.

2 Press	button to select the “SPK SETUP”, and then	OPERATION
press the ENTER ( ) button.
3 Press	button to select the speaker you want.
• Each time you press this button, FRONT ➝ CEN ➝ SURR ➝ S.BACK ➝
SUB ➝ CROVR will be selected in turn.

4 Press …† button to set the mode (LARGE, SMALL etc.) for the selected speaker.

5 Repeat steps 3-4 to set the mode for each speaker.

To exit setup mode

•Wait for about 5 seconds or press SETUP button.

“SETUP OFF” appears on the display and Setup Mode is exited.

Setting the Speaker

•Each time you press this button, SUB : YES, SUB : NO will be selected in turn.

• If FRONT is set to LARGE, you can select YES or NO for SUB.

• If FRONT is set to SMALL, SUB is automatically set to YES. NO cannot be selected.

SPEAKER	Possible Settings	Default Setting
FRONT(Front)	LARGE,SMALL	SMALL
CEN(Center)	LARGE,SMALL,NONE	SMALL
SURR(Surround)	LARGE,SMALL,NONE	SMALL
S.BACK (Surround Back)	LARGE,SMALL,NONE	SMALL
SUB(Subwoofer)	YES,NO	YES
CROVR	60,80,100,120,	150Hz
(Crossover Frequency)	150,180,200(Hz)

•LARGE : Select when using large speakers. You can listen to full range sound.

•SMALL : Select this when using small speakers

•NONE : Select when no speaker is used

•YES (subwoofer) : Select when using the subwoofer speaker.

•NO (subwoofer) : Select when not using the subwoofer speaker.

•CROVR : Select the crossover frequency for the best bass response in your room.

20 21