A L I G N I N G Y O U R P R I N T H E A D S
Aligning Your Print Heads
For optimum print quality, your print heads should be aligned. To align your print heads follow these instructions.
On your control panel press the menu
button 
. Press the down 
1 navigation button until option
“3. Maintenance” displays. Press the
right 
navigation button until “1. Clean Print Head1” displays. Press the select button 
. The print heads will complete a priming cycle which lasts approximately 2 minutes.
On your control panel, press the menu
button 
. Press the down 
navigation 2 button until “3. Maintenance” displays.
Press the right 
navigation button until option “6. Align Print Head” displays. Press the select button 
.
An alignment page will print out.
Find the patterns that are best aligned in 3 line A. Then select the corresponding pattern numbers on your control panel
by using the left 
and right 
navigation buttons. Press the select
button 
to store your choice for pattern A.
Go through the same procedure for patterns B, C, and D until the display reads “Ready to Copy”. The alignment is now complete.
A
B
C
D
G e t t i n g S t a r t e d
13