Canon CP-220 manual Turning On the Printer, Place the printer on a flat surface

Page 28

Turning On the Printer

5

4

1

At least 15 cm (6 inches) of open space in the front and back, and at least 10 cm (4 inches) on the left and right.

2

3

To Power Outlet

Compact

Power Adapter

Refer to the above figure during the following procedure (the numbers in the figure correspond to the steps in the procedure).

1 Place the printer on a flat surface.

When printing, the paper temporarily projects out from the rear, so allow a clear space of at least 15 cm (6 inches) in the back.

2 Connect the supplied power cord to the CA-CP100 Compact Power Adapter (also supplied).

3

4

5

Plug the power cord into a power outlet.

Connect the Compact Power Adapter cable to the printer.

At this point the CP-220 is ON, so the printer’s indicator lights green.

Press the ON/OFF button (only on the CP-330).

When the printer is turned on, the printer’s indicator lights green.

To Turn the Printer Off

With CP-330: Press the ON/OFF button, releasing it when the indicator turns off.

With CP-220: Unplug the Compact Power Adapter from the printer (the indicator turns off).

When making connections, confirm that the shape of the plug matches the shape of the socket on the device being connected.

The power outlet where the printer’s power plug is connected should be located where the plug can be easily removed if a problem occurs.

28

Image 28
Contents User Guide Contents Safety Precautions Read This First About the ManualsPrinting Flow Diagram Install the necessary software on your computerAbout the Connection Cable PrintingInstalling the Printer Driver InstallingWindows Page Click the Next button Do not select CD-ROM drive Printer driver is installed Windows Me Now you can continue and install the printer driver Page Printer driver is installed After a moment, the Found New Hardware Wizard dialog appears Do not select CD-ROM drives Page Click the Next button Windows XP When the following message appears, click the Finish button Page Page Example Uninstalling Click the Exit button Restart your computer Turning On the Printer Place the printer on a flat surfaceConnecting the Printer to Your Computer There is no need to turn off the printer or your computer Printing Printing with Standard Sheets or Full Size Label Sheets Page Follow this order to print Album Type Description Page Page Page Printing on 8-Label Sheets Merging Images to Print a Panorama Guidance Printing Part of an Image Trimming Select the area you want to print Adjusting Color and Brightness Image Quality Adjustment About the Print Area and Pixels AppendicesPrint Area Size sheet Number of Pixels Paper Type Total numberTroubleshooting This section describes how to troubleshoot problemsPrinting stops while it is in progress Error Messages Errors where printing can resumeCause There is no more ink in the ink cassette Correction Insert the correct paper cassette Errors where printing is canceled Cause There is a problem with the ink cassetteProblem with the printer Turn printer off and back on