Adding Your Multifunction to Your Network
Step Three | Step Four |
Select Confirm LAN settings, then press the OK button.
Select WLAN setting list, then press the OK button.
Make sure that Connection is set to Active, and then press the Copy button to return to standby.
It may take a while before the connection is complete. In this case, press the Back* button and wait for about a minute, then display the Wireless LAN setting list screen again.
*Back button location varies depending on model.
NOTE: If the communication status does not improve, make sure of the following.
•The machine and network device are turned on.
•There is no obstacle between the machine and access point, and wireless communication is possible.
•There is no microwave, refrigerator or any other object that may cause radio interference nearby.
11