Ill. Installation Procedures Prepare the system

1.Check whether printer conditions are normal.

2.Enter nozzle test option (2-1), print nozzle test sheet to see whether nozzle is normal (2-2,2-3).

Pic. 2-1

Pic. 2-2

Pic. 2-3

3.If printer is alright, please print a picture to see the result.

Ill. Installation Procedures

1. Prepare the system

Put this system on the right side of the printer, tidy up ink flow tubes (3-1-1), pull out all air plug and replace them with air filter with bigger side downward (keep air plug for the next use) (3-1-2). Move tube valve to close position (3-1-3), if you do not close this valve, ink maybe flow back, leak, or mis-color.

Pic. 3-1-1

Pic. 3-1-2

Pic. 3-1-3

2. Install chips

Please install the 8BK,8C,8M,8Y chips according the following: use the knife to cut the mold tip off on the original cartridges, take the original chips out carefully, and install them on the system cartridge, use molding tool to fix the chips. Please install 5BK chips as following: take the original 5BK chips off, cut the molding tip off system 5BK chips , add double-sticker on 5BK.

3. Install the CISS cartridges

Turn the printer on, open it’s cover, cartridge holder will move to the "cartridge change" position, plug the power source off (3-3-1), take the original cartridge off.

2INSTALLATION MANUAL ON CISS FOR PRINTER CANON IX 4000/IP 4200