Connecting the KVM
Switch or Server
Step 1 Make sure your KVM switch or server is powered OFF.
Step 2 Using the included PS/2 KVM Cable Kit, connect one set of VGA and PS/2 connectors to the back of the Console. (Refer to diagrams below.)
Step 3 Connect the other end of the Cable Kit to the console monitor, keyboard, and mouse ports on your KVM switch or server. (Refer to diagrams below.)
Step 4 Power ON the Console.
Step 5 Power ON the KVM switch or server connected to the Console.
Step 2 | Step 3 |
Connecting to a KVM switch | Connecting to a server |
Console | Console |
6'! | 6'! |
KVM Switch | Server |
| |
JcXm\@eglk |
|
DXjk\i@eglk&JcXm\Flkglk |
|
Connecting the KVM Switch or Server
6