Instructions (cont’d.)
2.Install base angles to vertical upright channels.
a.Leaving vertical upright channels on edge, align holes in base with corresponding holes in each upright channel. Long leg of base should be facing you.
b.Install 4 hex head bolts and lock washers. Finger tighten only.
c.Turn vertical upright assembly over (rotate 180 degrees) and repeat steps (a) and (b). Finger tighten only.
3.Final tightening.
a.Stand rack upright.
b.Square unit using a level or carpenter square.
c.Tighten all bolts using socket or wrench.
4.Secure rack to floor.
All racks should be bolted to the floor, or to an equally
stabilizing and secure surface, after desired location is | Base Angle |
determined. |
|
5.Equipment installation.
Your rack is now ready for installation of equipment and panels.
EN
DE
FR
Belkin Tech Support
Europe: 00 800 223 55 460
For other languages: www.belkin.com/support
Belkin Ltd. | Belkin B.V. | Belkin GmbH | Belkin SAS | |||||||
Express Business Park | Boeing Avenue 333 | Hanebergstrasse 2 | 130 rue de Silly | |||||||
Shipton Way, Rushden | 1119 PH | 80637 Munich, | 92100 Boulogne Billancourt, | |||||||
NN10 6GL, United Kingdom | The Netherlands | Germany | France |
| ||||||
+44 | (0) | 1933 35 2000 | +31 | (0) | 20 654 7300 | +49 | (0) | 89 143405 0 | +33 (0) | 1 41 03 14 40 |
+44 | (0) | 1933 31 2000 fax | +31 | (0) | 20 654 7349 fax | +49 | (0) | 89 143405 100 fax | +33 (0) | 1 41 31 01 72 fax |
© 2005 Belkin Corporation. All rights reserved.
All trade names are registered trademarks of respective manufacturers listed.
RK5000ek RK2001ek Instructions | P35727ec |