Belkin F5D4081 user manual Overview, Changing the Network Password

Page 8

CONFIGURATION

Table of Contents

sections

1

Overview

The Adapter uses 128-bit AES encryption to block access from the outside.. By default, the protection is enabled.. However, it is recommended that you change the default network password with the “Encryption” button located on the units..

2

3

4

Changing the Network Password

1.With both Adapters plugged into the wall, press the “Encryption” button on both units for 10 seconds.. The password on these Adapters has now been changed to a random value..

2.Next, press the “Encryption” button on one unit for approximately one to three seconds.. The units will change the password in a maximum wait time of two minutes..

3.Next, press the “Encryption” button on the second unit for approximately one to three seconds.. The units will change the password in a maximum wait time of two minutes..

4.The new network password has now been saved to the second unit.. The password will not be lost, even if the Adapters are unplugged from the wall..

Share Powerline AV 3 Port

6

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Share Powerline AV 3 Port Table of Contents Introduction Features Introduction Product Specifications Package Contents System RequirementsInstalling and Setting Up the Adapters Overview Hardware SetupChanging the Network Password OverviewConfiguration Technical Support Australia New Zealand Singapore EuropeInformation EU Declaration of Conformity Belkin International, Inc., Limited 2-Year Product Warranty How state law relates to the warranty Share Powerline AV 3 Port
Top Page Image Contents