![](/images/new-backgrounds/1168207/16820739x1.webp)
Configuring Additional Computers Using Belkin NetSetup
3.Windows will now prompt you to insert the newly created client setup disk into the PC’s floppy drive. Insert the disk you labeled "Belkin Networking" into the floppy drive and click OK. The following screen will appear:
4.In the "Computer Name" field, type a name for the computer such as "Computer 2". Remember, the name must be different from that of the other computers on the network.
5.The "Workgroup" field should be filled in with the workgroup name you entered on the previous computer. Do not change this setting.
6.Type in a description such as "Windows 98". This can be anything you want and does not have to be different from or the same as the description of any other computer on the network. You may also leave this field blank.
18