STEP-BY-STEP INSTALLATION GUIDE
Connecting the Console
1.Power down your computers.
2.Remove the rear panel of the KVM Switch to expose the ports.
3. Connect the USB keyboard to the
designated USB port with the keyboard symbol on the KVM Switch.
Note: You must connect the USB keyboard to the designated USB connector to have keyboard hot key
switching functions. For more information on keyboard hot keys, see page 14.
4. Connect the USB mouse to the designated USB port with the mouse symbol
on the KVM Switch.
5.Connect any USB devices
you wish to share to the USB hub labeled “Device 1, Device 2” on the KVM Switch.
Note: When sharing USB storage devices,
6. Connect the monitor cable to the designated “Console DVI”
port on the KVM Switch.
11